ISO has developed over 25641 International Standards and all are included in the ISO Standards catalogue.
Draft standards for public comment
Standards at the enquiry stage are open for comments. You can find a list of standards that are currently at this stage. To comment on them, contact your national member.
| Comité | Título |
|---|---|
| IEC/ISO JSyC BDC | IEC/ISO Joint Systems Committee on Bio-digital convergence (IEC/ISO JSyC BDC) |
| IEC/ISO JTC 3 | Quantum technologies |
| ISO/IEC JTC 1 | Information technology |
| ISO/TC 1 | Screw threads |
| ISO/TC 2 | Fasteners |
| ISO/TC 4 | Rolling bearings |
| ISO/TC 5 | Ferrous metal pipes and metallic fittings |
| ISO/TC 6 | Paper, board and pulps |
| ISO/TC 8 | Ships and marine technology |
| ISO/TC 10 | Technical product documentation |
| ISO/TC 11 | Boilers and pressure vessels |
| ISO/TC 12 | Quantities and units |
| ISO/TC 14 | Shafts for machinery and accessories |
| ISO/TC 17 | Steel |
| ISO/TC 18 | Zinc and zinc alloys - EN ESPERA |
| ISO/TC 19 | Preferred numbers - EN ESPERA |
| ISO/TC 20 | Aircraft and space vehicles |
| ISO/TC 21 | Equipment for fire protection and fire fighting |
| ISO/TC 22 | Road vehicles |
| ISO/TC 23 | Tractors and machinery for agriculture and forestry |
| ISO/TC 24 | Particle characterization including sieving |
| ISO/TC 25 | Cast irons and pig irons |
| ISO/TC 26 | Copper and copper alloys |
| ISO/TC 27 | Coal and coke |
| ISO/TC 28 | Petroleum and related products, fuels and lubricants from natural or synthetic sources |
| ISO/TC 29 | Small tools |
| ISO/TC 30 | Measurement of fluid flow in closed conduits |
| ISO/TC 31 | Tyres, rims and valves |
| ISO/TC 33 | Refractories |
| ISO/TC 34 | Food products |
| ISO/TC 35 | Paints and varnishes |
| ISO/TC 36 | Cinematography |
| ISO/TC 37 | Language and terminology |
| ISO/TC 38 | Textiles |
| ISO/TC 39 | Machine tools |
| ISO/TC 41 | Pulleys and belts (including veebelts) |
| ISO/TC 42 | Photography |
| ISO/TC 43 | Acoustics |
| ISO/TC 44 | Welding and allied processes |
| ISO/TC 45 | Rubber and rubber products |
| ISO/TC 46 | Information and documentation |
| ISO/TC 47 | Chemistry |
| ISO/TC 48 | Laboratory equipment |
| ISO/TC 51 | Pallets for unit load method of materials handling |
| ISO/TC 52 | Light gauge metal containers |
| ISO/TC 54 | Essential oils |
| ISO/TC 58 | Gas cylinders |
| ISO/TC 59 | Buildings and civil engineering works |
| ISO/TC 60 | Gears |
| ISO/TC 61 | Plastics |
| ISO/TC 63 | Glass containers |
| ISO/TC 67 | Oil and gas industries including lower carbon energy |
| ISO/TC 68 | Financial services |
| ISO/TC 69 | Applications of statistical methods |
| ISO/TC 70 | Internal combustion engines |
| ISO/TC 71 | Concrete, reinforced concrete and pre-stressed concrete |
| ISO/TC 72 | Textile machinery and accessories |
| ISO/TC 74 | Cement and lime - EN ESPERA |
| ISO/TC 76 | Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use |
| ISO/TC 77 | Products in fibre reinforced cement - EN ESPERA |
| ISO/TC 79 | Light metals and their alloys |
| ISO/TC 81 | Common names for pesticides and other agrochemicals |
| ISO/TC 82 | Mining |
| ISO/TC 83 | Sports and other recreational facilities and equipment |
| ISO/TC 84 | Devices for administration of medicinal products and catheters |
| ISO/TC 85 | Nuclear energy, nuclear technologies, and radiological protection |
| ISO/TC 86 | Refrigeration and air-conditioning |
| ISO/TC 87 | Cork |
| ISO/TC 89 | Wood-based panels |
| ISO/TC 91 | Surface active agents |
| ISO/TC 92 | Fire safety |
| ISO/TC 93 | Starch (including derivatives and by-products) |
| ISO/TC 94 | Personal safety -- Personal protective equipment |
| ISO/TC 96 | Cranes |
| ISO/TC 98 | Bases for design of structures |
| ISO/TC 100 | Chains and chain sprockets for power transmission and conveyors |
| ISO/TC 101 | Continuous mechanical handling equipment |
| ISO/TC 102 | Iron ore and direct reduced iron |
| ISO/TC 104 | Freight containers |
| ISO/TC 105 | Steel wire ropes |
| ISO/TC 106 | Dentistry |
| ISO/TC 107 | Metallic and other inorganic coatings |
| ISO/TC 108 | Mechanical vibration, shock and condition monitoring |
| ISO/TC 109 | Oil and gas burners |
| ISO/TC 110 | Industrial trucks |
| ISO/TC 111 | Round steel link chains, chain slings, components and accessories |
| ISO/TC 112 | Vacuum technology |
| ISO/TC 113 | Hydrometry |
| ISO/TC 114 | Horology |
| ISO/TC 115 | Pumps |
| ISO/TC 117 | Fans |
| ISO/TC 118 | Compressors and pneumatic tools, machines and equipment |
| ISO/TC 119 | Powder metallurgy |
| ISO/TC 120 | Leather |
| ISO/TC 121 | Anaesthetic and respiratory equipment |
| ISO/TC 122 | Packaging |
| ISO/TC 123 | Plain bearings |
| ISO/TC 126 | Tobacco and tobacco products |
| ISO/TC 127 | Earth-moving machinery |
| ISO/TC 130 | Graphic technology |
| ISO/TC 131 | Fluid power systems |
| ISO/TC 132 | Ferroalloys |
| ISO/TC 133 | Clothing sizing systems - size designation, size measurement methods and digital fittings |
| ISO/TC 134 | Fertilizers, soil conditioners and beneficial substances |
| ISO/TC 135 | Non-destructive testing |
| ISO/TC 136 | Furniture |
| ISO/TC 137 | Footwear sizing designations and marking systems |
| ISO/TC 138 | Plastics pipes, fittings and valves for the transport of fluids |
| ISO/TC 142 | Cleaning equipment for air and other gases |
| ISO/TC 145 | Graphical symbols |
| ISO/TC 146 | Air quality |
| ISO/TC 147 | Water quality |
| ISO/TC 148 | Sewing machines |
| ISO/TC 149 | Cycles |
| ISO/TC 150 | Implants for surgery |
| ISO/TC 153 | Valves |
| ISO/TC 154 | Processes, data elements and documents in commerce, industry and administration |
| ISO/TC 155 | Nickel and nickel alloys |
| ISO/TC 156 | Corrosion of metals and alloys |
| ISO/TC 157 | Non-systemic contraceptives and STI barrier prophylactics |
| ISO/TC 158 | Analysis of gases |
| ISO/TC 159 | Ergonomics |
| ISO/TC 160 | Glass in building |
| ISO/TC 161 | Controls and protective devices for gaseous and liquid fuels |
| ISO/TC 162 | Doors, windows and curtain walling |
| ISO/TC 163 | Thermal performance and energy use in the built environment |
| ISO/TC 164 | Mechanical testing of metals |
| ISO/TC 165 | Timber structures |
| ISO/TC 166 | Ceramic ware, glassware and glass ceramic ware in contact with food |
| ISO/TC 167 | Steel and aluminium structures |
| ISO/TC 168 | Prosthetics and orthotics |
| ISO/TC 170 | Surgical instruments |
| ISO/TC 171 | Document management applications |
| ISO/TC 172 | Optics and photonics |
| ISO/TC 173 | Assistive products |
| ISO/TC 174 | Jewellery and precious metals |
| ISO/TC 176 | Quality management and quality assurance |
| ISO/TC 178 | Lifts, escalators and moving walks |
| ISO/TC 180 | Solar energy |
| ISO/TC 181 | Safety of toys |
| ISO/TC 182 | Geotechnics |
| ISO/TC 183 | Copper, lead, zinc and nickel ores and concentrates |
| ISO/TC 184 | Automation systems and integration |
| ISO/TC 185 | Safety devices for protection against excessive pressure |
| ISO/TC 186 | Cutlery and table and decorative metal hollow-ware |
| ISO/TC 188 | Small craft |
| ISO/TC 189 | Ceramic tile |
| ISO/TC 190 | Soil quality |
| ISO/TC 191 | Animal (mammal) traps - EN ESPERA |
| ISO/TC 192 | Gas turbines |
| ISO/TC 193 | Natural gas |
| ISO/TC 194 | Biological and clinical evaluation of medical devices |
| ISO/TC 195 | Building construction machinery and equipment |
| ISO/TC 197 | Hydrogen technologies |
| ISO/TC 198 | Sterilization of health care products |
| ISO/TC 199 | Safety of machinery |
| ISO/TC 201 | Surface chemical analysis |
| ISO/TC 202 | Microbeam analysis |
| ISO/TC 204 | Intelligent transport systems |
| ISO/TC 205 | Building environment design |
| ISO/TC 206 | Fine ceramics |
| ISO/TC 207 | Environmental management |
| ISO/TC 209 | Cleanrooms and associated controlled environments |
| ISO/TC 210 | Quality management and corresponding general aspects for products with a health purpose including medical devices |
| ISO/TC 211 | Geographic information/Geomatics |
| ISO/TC 212 | Medical laboratories and in vitro diagnostic systems |
| ISO/TC 213 | Dimensional and geometrical product specifications and verification |
| ISO/TC 214 | Elevating work platforms |
| ISO/TC 215 | Health informatics |
| ISO/TC 216 | Footwear |
| ISO/TC 217 | Cosmetics |
| ISO/TC 218 | Timber |
| ISO/TC 219 | Floor coverings |
| ISO/TC 220 | Cryogenic vessels |
| ISO/TC 221 | Geosynthetics |
| ISO/TC 222 | Personal financial planning - EN ESPERA |
| ISO/TC 224 | Drinking water, wastewater and stormwater systems and services |
| ISO/TC 225 | Market, opinion and social research |
| ISO/TC 226 | Materials for the production of primary aluminium |
| ISO/TC 227 | Springs |
| ISO/TC 228 | Tourism and related services |
| ISO/TC 229 | Nanotechnologies |
| ISO/TC 232 | Education and learning services |
| ISO/TC 234 | Fisheries and aquaculture |
| ISO/TC 238 | Solid Biofuels and Pyrogenic Biocarbon |
| ISO/TC 241 | Road traffic safety management systems |
| ISO/TC 244 | Industrial furnaces and associated processing equipment |
| ISO/PC 245 | Cross-border trade of second-hand goods |
| ISO/TC 249 | Traditional Chinese medicine |
| ISO/PC 250 | Sustainability in event management |
| ISO/TC 251 | Asset management |
| ISO/TC 254 | Safety of amusement rides and amusement devices |
| ISO/TC 255 | Biogas |
| ISO/TC 256 | Pigments, dyestuffs and extenders |
| ISO/TC 258 | Project, programme and portfolio management |
| ISO/TC 260 | Human resource management |
| ISO/TC 261 | Additive manufacturing |
| ISO/TC 262 | Risk management |
| ISO/TC 263 | Coalbed methane (CBM) |
| ISO/TC 264 | Fireworks |
| ISO/TC 265 | Carbon dioxide capture, transportation, and geological storage |
| ISO/TC 266 | Biomimetics |
| ISO/TC 267 | Facility management |
| ISO/TC 268 | Sustainable cities and communities |
| ISO/TC 269 | Railway applications |
| ISO/TC 270 | Plastics and rubber machines |
| ISO/TC 272 | Forensic sciences |
| ISO/TC 274 | Light and lighting |
| ISO/TC 275 | Sludge recovery, recycling, treatment and disposal |
| ISO/TC 276 | Biotechnology |
| ISO/TC 279 | Innovation management |
| ISO/TC 281 | Fine bubble technology |
| ISO/TC 282 | Water reuse |
| ISO/TC 283 | Occupational health and safety management |
| ISO/TC 285 | Clean cookstoves and clean cooking solutions |
| ISO/TC 286 | Collaborative business relationship management |
| ISO/TC 287 | Sustainable processes for wood and wood-based products |
| ISO/TC 289 | Brand evaluation |
| ISO/TC 290 | Online reputation - EN ESPERA |
| ISO/TC 291 | Domestic gas cooking appliances |
| ISO/TC 292 | Security and resilience |
| ISO/TC 293 | Feed machinery |
| ISO/TC 295 | Audit data services |
| ISO/TC 296 | Bamboo and rattan |
| ISO/TC 297 | Waste collection and transportation management |
| ISO/TC 298 | Rare earth |
| ISO/TC 299 | Robotics |
| ISO/TC 300 | Solid recovered materials, including solid recovered fuels |
| ISO/TC 301 | Energy management and energy savings |
| ISO/PC 302 | Guidelines for auditing management systems |
| ISO/TC 304 | Healthcare organization management |
| ISO/PC 305 | Sustainable non-sewered sanitation systems |
| ISO/TC 306 | Foundry machinery |
| ISO/TC 307 | Blockchain and distributed ledger technologies |
| ISO/TC 308 | Chain of custody |
| ISO/TC 309 | Governance of organizations |
| ISO/TC 310 | Child care articles |
| ISO/TC 312 | Excellence in service |
| ISO/TC 313 | Packaging machinery |
| ISO/TC 314 | Ageing societies |
| ISO/TC 315 | Cold chain logistics |
| ISO/PC 317 | Consumer protection: privacy by design for consumer goods and services |
| ISO/TC 319 | Karst |
| ISO/TC 321 | Transaction assurance in E-commerce |
| ISO/TC 322 | Sustainable finance |
| ISO/TC 323 | Circular economy |
| ISO/TC 324 | Sharing economy |
| ISO/TC 326 | Machinery intended for use with foodstuffs |
| ISO/TC 327 | Natural stones |
| ISO/TC 328 | Engineered stones |
| ISO/PC 329 | Consumer incident investigation guideline |
| ISO/TC 330 | Surfaces with biocidal and antimicrobial properties |
| ISO/TC 331 | Biodiversity |
| ISO/TC 332 | Security equipment for financial institutions and commercial organizations |
| ISO/TC 333 | Lithium |
| ISO/TC 334 | Reference materials |
| ISO/PC 335 | Guidelines for organizations to increase consumer understanding of online terms and conditions |
| ISO/TC 336 | Laboratory design |
| ISO/PC 337 | Guidelines for the promotion and implementation of gender equality |
| ISO/TC 338 | Menstrual products |
| ISO/TC 339 | Small hydropower plants (SHP plants) |
| ISO/TC 340 | Natural gas fuelling stations |
| ISO/TC 341 | Heat supply network |
| ISO/TC 342 | Management consultancy |
| ISO/PC 343 | Sustainable development goals management |
| ISO/TC 344 | Innovative logistics |
| ISO/TC 345 | Specialty metals and minerals |
| ISO/TC 346 | Mechanical energy storage technology |
| ISO/TC 347 | Data-driven agrifood systems |
| ISO/PC 348 | Sustainable raw materials |
| ISO/TC 349 | Cultural heritage conservation |
| ISO/WS ESG | Framework for implementing environment, social and governance (ESG) principles |