Materials for the reinforcement of plastics, consulte 59.100
Filtrar :
| Norma o proyecto(93) | Etapa | TC |
|---|---|---|
|
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
95.99 | ISO/TC 61/SC 2 |
|
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
90.92 | ISO/TC 61/SC 2 |
|
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
50.00 | ISO/TC 61/SC 2 |
|
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
|
60.60 | ISO/TC 61/SC 13 |
|
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
|
60.60 | ISO/TC 61/SC 13 |
|
Textile glass reinforced plastics — Determination of loss on ignition
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 1: General conditions
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 3: Wet compression moulding
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs — Amendment 1
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 5: Filament winding
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 7: Resin transfer moulding
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
|
90.92 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
|
90.93 | ISO/TC 61/SC 13 |
|
Plastics — Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Glass reinforced materials — Determination of tensile properties
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
|
90.93 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
|
90.93 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
|
90.93 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
|
90.93 | ISO/TC 61/SC 13 |
|
Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of flexural (cross-breaking) strength
|
95.99 | ISO/TC 61/SC 13 |
|
Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
|
60.60 | ISO/TC 61/SC 13 |
|
Textile glass reinforced plastics — Determination of apparent interlaminar shear properties by short-beam test
|
95.99 | ISO/TC 61/SC 13 |
|
Textile glass reinforced thermosetting plastics — Properties and test methods
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced thermosetting plastics — Properties and test methods
|
90.92 | ISO/TC 61/SC 13 |
|
Reinforced plastics based on unsaturated polyester resins — Determination of residual styrene monomer content
|
95.99 | ISO/TC 61/SC 12 |
|
Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
|
90.93 | ISO/TC 61/SC 12 |
|
Guidance for the analysis of differences between various standards of fibre reinforced plastic-working towers made of prefabricated elements
|
50.00 | ISO/TC 61/SC 11 |
|
Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods
|
90.93 | ISO/TC 61/SC 13 |
|
Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal — Electrochemical tests in neutral sodium chloride solution
|
60.60 | ISO/TC 61/SC 13 |
|
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test
|
60.60 | ISO/TC 61/SC 13 |
|
Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Non-destructive testing — Part 2: Array and air-coupled ultrasonics
|
40.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Non-destructive inspection techniques — Part 3: Active thermography
|
30.98 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Non-destructive inspection — Part 4: Laser shearography
|
40.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Non-destructive inspection techniques — Part 5: Microwave
|
30.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Determination of compressive properties in the direction parallel to the plane of lamination
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Prepregs — Definitions of terms and symbols for designations
|
95.99 | ISO/TC 61/SC 1 |
|
Textile glass reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
|
95.99 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Sheet moulding compound (SMC) — Requirements and specifications
|
60.60 | ISO/TC 61/SC 13 |
|
Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
|
90.92 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Requirements and specifications
|
50.00 | ISO/TC 61/SC 13 |
|
Textile-glass-reinforced plastics — Rovings — Preparation of unidirectional plates by winding
|
95.99 | ISO/TC 61/SC 13 |
|
Glass-reinforced plastics — Preparation of plates with unidirectional reinforcements by bag moulding
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Reinforced moulding compounds and prepregs — Determination of apparent volatile-matter content
|
90.92 | ISO/TC 61/SC 13 |
|
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
|
95.99 | ISO/TC 61/SC 2 |
|
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
|
95.99 | ISO/TC 61/SC 2 |
|
Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics
|
60.60 | ISO/TC 61/SC 2 |
|
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids
|
95.99 | ISO/TC 71/SC 6 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids
|
90.92 | ISO/TC 71/SC 6 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars
|
40.20 | ISO/TC 71/SC 6 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets
|
95.99 | ISO/TC 71/SC 6 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets
|
90.92 | ISO/TC 71/SC 6 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets
|
40.20 | ISO/TC 71/SC 6 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 3: CFRP strips
|
90.60 | ISO/TC 71/SC 6 |
|
Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 4: FRP grids
|
40.20 | ISO/TC 71/SC 6 |
|
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre reinforced plastics — Telescopic ladder — Requirements and test methods
|
60.60 | ISO/TC 61/SC 11 |
|
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life — Technical Corrigendum 1
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Determination of the plain-pin bearing strength
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of open-hole compression strength
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of open-hole compression strength
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions
|
90.93 | ISO/TC 61/SC 13 |
|
Composites and reinforcement fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Combined stress test
|
60.00 | ISO/TC 61/SC 13 |
|
Classification for discrete polymer fibre for fibre-reinforced cementitious composites
|
40.20 | ISO/TC 71/SC 6 |
|
Plastics — Guide to the writing of test methods
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of flexural properties
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of flexural properties — Amendment 1
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of flexural properties — Technical Corrigendum 1
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
|
60.60 | ISO/TC 61/SC 13 |
|
Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
|
95.99 | ISO/TC 61/SC 13 |
|
Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method — Technical Corrigendum 1
|
60.60 | ISO/TC 61/SC 13 |
|
Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
|
95.99 | ISO/TC 71/SC 6 |
|
Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials
|
90.20 | ISO/TC 71/SC 6 |
|
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
|
95.99 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
|
60.60 | ISO/TC 61/SC 13 |
|
Composites — Prepregs — Determination of resin flow
|
90.93 | ISO/TC 61/SC 13 |
|
Composites — Prepregs — Determination of gel time
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method
|
90.93 | ISO/TC 61/SC 13 |
|
Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced polymer (FRP) reinforcement for concrete structures — Part 1: Specifications of FRP sheets
|
40.20 | ISO/TC 71/SC 6 |
|
Fibre reinforced polymer (FRP) reinforcement for concrete structures — Part 2: Specifications of CFRP strips
|
60.60 | ISO/TC 71/SC 6 |
|
Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level
|
90.93 | ISO/TC 61/SC 13 |
|
Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen
|
95.99 | ISO/TC 71/SC 6 |
|
Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen
|
60.60 | ISO/TC 71/SC 6 |
|
Fibre-reinforced composites — Measurement of interfacial shear strength by means of a micromechanical single-fibre pull-out test
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus by double beam shear test
|
90.92 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
|
90.93 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Determination of laminate through-thickness properties — Part 1: Direct tension and compression tests
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic compositess — Determination of laminate through-thickness properties — Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based systems
|
90.93 | ISO/TC 61/SC 13 |
|
Test method for fibre-reinforced cementitious composites — Load-deflection curve using circular plates
|
90.92 | ISO/TC 71/SC 6 |
|
Composites and metal assemblies — Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres — Salt spray tests
|
90.93 | ISO/TC 61/SC 13 |
|
Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
|
90.60 | ISO/TC 71/SC 6 |
|
Plastics — Glass-fibre-reinforced products — Determination of fibre length
|
95.99 | ISO/TC 61/SC 13 |
|
Plastics — Glass-fibre-reinforced products — Determination of fibre length
|
60.60 | ISO/TC 61/SC 13 |
|
Carbon-fibre-reinforced composites — Determination of fibre weight content by thermogravimetry (TG)
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced composites — Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
|
60.60 | ISO/TC 61/SC 13 |
|
Composites and reinforcements fibres — Determination of the fracture energy of bonded plates of carbon fibre reinforced plastics (CFRPs) and metal using double cantilever beam specimens
|
60.60 | ISO/TC 61/SC 13 |
|
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength
|
60.60 | ISO/TC 61/SC 13 |
|
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength — Amendment 1: Precision data
|
60.60 | ISO/TC 61/SC 13 |
|
Test methods for discrete polymer fibre for fibre-reinforced cementitious composites
|
60.60 | ISO/TC 71/SC 6 |
|
Laminates and moulding compounds — Prepregs — Determination of tack
|
60.60 | ISO/TC 61/SC 13 |
|
Fibre-reinforced plastic composites — Full-section compressive test for pultruded profiles
|
60.60 | ISO/TC 61/SC 13 |
|
Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Determination of the cross tension strength
|
60.60 | ISO/TC 61/SC 13 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.