Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 61/SC 1 Terminology 9 0
ISO/TC 61/SC 2 Mechanical behavior 49 7
ISO/TC 61/SC 4 Burning behaviour 25 6
ISO/TC 61/SC 5 Physical-chemical properties 88 12
ISO/TC 61/SC 6 Ageing, chemical and environmental resistance 43 10
ISO/TC 61/SC 9 Thermoplastic materials 122 11
ISO/TC 61/SC 10 Cellular plastics 26 5
ISO/TC 61/SC 11 Products 143 10
ISO/TC 61/SC 12 Thermosetting materials 88 3
ISO/TC 61/SC 13 Composites and reinforcement fibres 108 16
ISO/TC 61/SC 14 Environmental aspects 41 12
Filter :
Standard and/or project under the direct responsibility of ISO/TC 61 Secretariat Stage ICS
Plastics and ebonite — Determination of temperature of deflection under load
95.99
Withdrawal of ISO/R 117-1959
95.99
Withdrawal of ISO 118-1976
95.99
Withdrawal of ISO/R 173-1961
95.99
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution
95.99
Plastics — Determination of migration of plasticizers
95.99
Plastics — Determination of flexural properties of rigid plastics
95.99
Plastics — Determination of the thermal stability of polyvinyl chloride and related copolymers and their compounds by splitting off of hydrogen chloride
95.99
Plastics — List of equivalent terms
95.99
Plastics — List of equivalent terms — Addendum 4
95.99
Withdrawal of ISO/R 292-1967
95.99
Plastics — Compression moulding test specimens of thermoplastic materials
95.99
Plastics — Injection moulding test specimens of thermoplastic materials
95.99
Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method
95.99
Plastics — Determination of the Vicat softening temperature of thermoplastics
95.99
Plastics — Determination of viscosity number of polyamides in dilute solution
95.99
Withdrawal of ISO/R 462-1965
95.99
Plastics — Methods for maintaining constant relative humidity in small enclosures by means of aqueous solutions
95.99
Plastics — Determination of the refractive index of transparent plastics
95.99
Plastics — Testing with the torsion pendulum
95.99
Plastics - Non-plasticized cellulose acetate - Determination of moisture content
95.99
Plastics — Polyamides — Determination of matter extractable by boiling methanol
95.99
Withdrawal of ISO/R 600-1967
95.99
Plastics — Determination of compressive properties
95.99
Cellular rubbers and plastics — Determination of apparent density
95.99
Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
95.99
Withdrawal of ISO/R 869-1968
95.99
Withdrawal of ISO/R 870-1968
95.99
Plastics — Determination of ash of unplasticized cellulose acetate
95.99
Plastics — Determination of resistance to change upon exposure under glass to daylight
95.99
Withdrawal of ISO/R 878-1968
95.99
Withdrawal of ISO/R 879-1968
95.99
Withdrawal of ISO/R 922-1969
95.99
Plastics — Determination of the water content in polyamides
95.99
Plastics — Symbols
95.99
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties
95.99
Withdrawal of ISO 1060-1975
95.99
Plastics — Polyamide 66, 610 and 6 — Accelerated conditioning of test specimens
95.99
Plastics — Determination of the melt flow rate of thermoplastics
95.99
Plastics — Determination of behaviour in a ventilated tubular oven
95.99
Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test
95.99
Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
95.99
Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine
95.99
Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation
95.99
Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
95.99
Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number
95.99
Withdrawal of ISO/R 1195-1970
95.99
Rigid cellular plastics — Bending test
95.99
Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution
95.99
Plastics — PVC resins — Determination of ash and sulphated ash
95.99
Plastics — Determination of flammability and burning rate of plastics in the form of film
95.99
Plastics — Polystyrene moulding and extrusion materials — Part 2: Determination of properties
95.99
Withdrawal of ISO/R 1627-1970
95.99
Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers
95.99
Plastics — Industrial laminated sheets based on thermosetting resins — Specification
95.99
Cellular plastics — Determination of water vapour transmission rate of rigid materials
95.99
Plastics — Liquid resins — Determination of density by the pyknometer method
95.99
Plastics — Specification for polyamide homopolymers
95.99
Textile glass products — Continuous filament yarns and staple fibre yarns — Determination of twist
95.99
Textile glass yarns — Designation
95.99
Plastics — Aqueous dispersions of polymers and copolymers — Determination of white point temperature and minimum film-forming temperature
95.99
Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity
95.99
Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injection moulding and compression moulding)
95.99
Title missing - Legacy paper document
95.99
Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
95.99
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation
95.99
Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 2: Determination of properties
95.99
Cellular plastics — Test for dimensional stability of rigid materials
95.99
Textile glass — Rovings — Basis for specification
95.99
Withdrawal of ISO 2798-1974
95.99
Plastics — Preparation of test specimens by machining
95.99
Rigid cellular plastics — Determination of water absorption
95.99
Plastics — Impact-resistant polystyrenes — Part 2: Determination of properties
95.99
Plastics — Designation of impact-resistant polystyrenes
95.99
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation
95.99
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties
95.99
Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
95.99
Plastics — Preparation and use of multipurpose test specimens
95.99
Plastics — Polymers in the liquid, emulsified or dispersed state — Determination of viscosity with a rotational viscometer working at defined shear rate
95.99
Textile glass — Yarns — Determination of breaking force and breaking elongation
95.99
Textile glass — Determination of tensile breaking force of mats
95.99
Textile glass — Determination of twist balance index of yarns
95.99
Withdrawal of ISO 3451-1976
95.99
Textile glass yarns — Basis for a specification
95.99
Withdrawal of ISR/TR 3717-1975
95.99
Withdrawal of ISO/TR 3718-1975
95.99
Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
95.99
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method
95.99
Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
95.99
Plastics — PVC resins for general use — Determination of plasticizer absorption at room temperature
95.99
Plastics — Determination of the thermal stability of polyvinyl chloride (PVC) — Conductometric method
95.99
Plastics — Methods of exposure to laboratory light sources
95.99
Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation
95.99
Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 2: Determination of properties
95.99
Plastics — Poly(ethylene terephthalate) granules — Determination of water content
95.99
Plastics — Determination of environmental stress cracking (ESC) — Constant tensile stress method
95.99
Lighters — Safety specification
95.99
Lighters — Safety specification
95.99
Lighters — Safety specification — Amendment 1: Clarification of structural requirements
95.99
Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1
95.99
Plastics — Guidelines for the recovery and recycling of plastics waste
95.99
Utility lighters — General consumer-safety requirements — Amendment 1: Clarification of requirements and addition of safety symbols
95.99

No matching records found. Please try changing the filter settings.