Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod

Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of ignition temperature using a hot-air furnace

Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame

Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance

Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test

Plastics — Determination of flammability by oxygen index

Plastics — Smoke generation — Part 1: Guidance on optical-density testing

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method

Plastics — Smoke generation — Determination of optical density by a single-chamber test

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1: Specimens

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens

Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source

Lighters — Safety specification

Lighters — Safety specifications

Lighters — Safety specifications

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Fire tests — Standard ignition sources

Plastics — Determination of the combustibility of specimens using a 125 mm flame source

Plastics — Survey of ignition sources used for national and international fire tests

Plastics — Guidance for the use of standard fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests

Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1

Plastics — Guidance for the use of standard fire tests

Plastics — Guidance for the use of standard fire tests

Plastics — Guidance for the use of standard fire tests

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater

Plastics — Vertical flame spread determination for film and sheet

Plastics — Vertical flame spread determination for film and sheet

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Simple heat release test using a conical radiant heater and a thermopile detector

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications

Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens

Utility lighters — General consumer-safety requirements

Utility lighters — Safety specifications

Utility lighters — Safety specifications

Plastics — Fire performance test on water-filled plastic pipes

Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics

Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter

Plastics — Application of spread of flame test to plastic pipes

Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites

Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods

Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1

Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1