Working draft
ISO/WD 25249-2
Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting
Reference number
ISO/WD 25249-2
Edition 1
Working draft
ISO/WD 25249-2
89569
A working group has prepared a draft.

Abstract

This standard specifies the general requirements to surface corrosion protection of structural members for offshore wind structurers for execution of the preparation-, and coating process on steel tower structures for off-shore wind in order to ensure adequate levels of durability of the following types of coating protective systems: — metal material (e.g., Zn99,99, ZnAl15) based applied using thermal spraying and supplied in the state: as-sprayed, sealed, or with organic coating of e.g. type epoxy-, and polyurethane; — based on paint products of e.g. type: zinc-rich-, epoxy-, and polyurethane. related to be following topics: — Execution specification of coating systems; — Manufacturer’s documentation (Quality assurance system, quality plan etc.); — Manufacturing process; — Inspection, testing correction; — As-built documentation This standard may be required to be used in conjunction with one or more of the following Parts: — Part 1: Design considerations; — Part 3: Primary steel components - Supplementary requirements for Foundations; — Part 4: Primary steel components - Supplementary requirements for Towers; — Part 5: Supplementary requirements for primary structural steel- and cast components for rotor nacelle assembly; NOTE Typical the following components should be considered as offshore wind and related structures. — Offshore steel foundation for wind turbine, substation and topsides — Steel Tower sections — Structural steel, cast iron or cast steel, and welded/bolted main components in the rotor-nacelle assembly.

General information

  •  : Under development
    : Close of comment period [20.60]
  •  : 1
  • ISO/TC 107
  • RSS updates

Got a question?

Check out our Help and Support