Reference number
ISO 898-5:2012
ISO 898-5:2012
© ISO 2024
International Standard
ISO 898-5:2012
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
Edition 3
2012-06
2012-06
ISO 898-5:2012
54038
Published
(Edition 3, 2012)
This publication was last reviewed and confirmed in 2022.
Therefore this version remains current.
Abstract
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.
Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.
ISO 898-5:2012 is applicable to set screws and similar fasteners:
- made of carbon steel or alloy steel,
- having a triangular ISO metric screw thread according to ISO 68-1,
- with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2,
- with diameter/pitch combinations according to ISO 261 and ISO 262, and
- having thread tolerances according to ISO 965-1 and ISO 965-2.
General information
-
Status: PublishedPublication date: 2012-06Stage: International Standard confirmed [90.93]
-
Edition: 3Number of pages: 15
-
Technical Committee :ISO/TC 2/SC 11ICS :21.060.10
- RSS updates
Life cycle
-
Previously
WithdrawnISO 898-5:1998
-
Now
