Filter :
Standard and/or project under the direct responsibility of ISO/TC 92/SC 2 Secretariat Stage ICS
Fire-resistance tests — Elements of building construction — Part 1: General requirements
90.92
Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1
60.60
Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 2
60.60
Fire-resistance tests — Elements of building construction — Part 1: General requirements
20.20
Fire-resistance tests — Elements of building construction — Part 2: Requirements and recommendations for measuring furnace exposure on test samples
60.60
Fire-resistance tests — Elements of building construction — Part 2: Guidance on measuring uniformity of furnace exposure on test samples
95.99
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and test data application
95.99
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
90.92
Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements
90.60
Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements
90.60
Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams
90.93
Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns
90.60
Fire-resistance tests — Elements of building construction — Part 8: Specific requirements for non-loadbearing vertical separating elements
90.93
Fire-resistance tests — Elements of building construction — Part 8: Specific requirements for non-loadbearing vertical separating elements — Technical Corrigendum 1
60.60
Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements
90.93
Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements — Technical Corrigendum 1
60.60
Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
90.93
Fire resistance tests — Elements of building construction — Part 11: Specific requirements for the assessment of fire protection to structural steel elements
90.93
Fire resistance tests — Elements of building construction — Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
90.93
Fire resistance tests — Elements of building construction — Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces — Amendment 1
20.00
Fire-resistance tests — Elements of building construction — Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
60.60
Fire-resistance tests — Elements of building construction — Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar
60.60
Fire resistance tests — Door and shutter assemblies — Part 1: General requirements
60.60
Fire-resistance tests — Part 2: Lift landing door assemblies
95.99
Fire-resistance tests — Part 2: Lift landing door assemblies
90.60
Fire resistance tests — Part 3: Door and shutter assemblies horizontally oriented
90.93
Fire resistance tests — Door and shutter assemblies — Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction
60.60
Fire-resistance tests — Door and shutter assemblies — Amendment 1
95.99
Fire resistance tests — Door and shutter assemblies
95.99
Fire-resistance tests — Door and shutter assemblies
95.99
Fire-resistance tests — Glazed elements — Amendment 1
95.99
Fire-resistance tests — Elements of building construction — Glazed elements
90.93
Fire tests — Small chimneys — Testing at elevated temperatures
95.99
Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests
90.93
Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1
60.60
Fire tests — Smoke control door and shutter assemblies — Part 2: Commentary on test method and test data application
95.99
Fire tests — Smoke-control door and shutter assemblies — Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy
90.93
Fire-resistance tests — Contribution made by suspended ceilings to the protection of steel beams in floor and roof assemblies
95.99
Fire containment — Elements of building construction — Part 1: Ventilation ducts
90.20
Fire containment — Elements of building construction — Part 1: Ventilation ducts — Amendment 1
60.60
Fire containment — Elements of building construction — Part 2: Kitchen extract ducts
90.93
Fire resistance tests — Ventilation ducts
95.99
Principles and rationale underlying calculation methods in relation to fire resistance of structural elements
95.99
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method
95.99
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method — Amendment 1
95.99
Fire resistance tests — Fire dampers for air distribution systems — Part 2: Classification, criteria and field of application of test results
95.99
Fire resistance tests — Fire dampers for air distribution systems — Part 3: Guidance on the test method
95.99
Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism
95.99
Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism — Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
95.99
Fire resistance tests — Fire dampers for air distribution systems — Part 5: Intumescent fire dampers
90.93
Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals
90.93
Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals
90.93
Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals — Technical Corrigendum 1
60.60
Fire tests for building elements and components — Fire testing of service installations — Part 3: Single component penetration seals — Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
60.60
External exposure of roofs to fire — Part 1: Test method
95.99
External exposure of roofs to fire — Part 1: Test method
90.93
External fire exposure to roofs — Part 2: Classification of roofs
95.99
External exposure of roofs to fire — Part 2: Classification of roofs
95.99
External exposure of roofs to fire — Part 3: Commentary
60.60
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 1: Loadbearing elements and vertical and horizontal separating elements
60.60
Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 2: Non-loadbearing elements
60.60
Fire-resistance tests — Guidance on the application and extension of results
95.99
Computational structural fire design — Review of calculation models, fire tests for determining input material data and needs for further development
90.93
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
90.93
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
95.99
Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design
60.60
Fire resistance — Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour
90.93
Fire resistance tests — Guidelines for computational structural fire design
60.60
Fire resistance tests — Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation
60.60
Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 1: General requirements
60.60
Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 2: Additional procedures for pipe penetration and cable transit sealing systems
50.00
Fire resistance tests — Elements of building construction — Requirements for active fire curtains
60.60
Guidance on the calculation of asymmetrical partitions/vertical membranes with respect to their fire resistance performance
30.99
Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels
90.92
Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels — Amendment 1
30.98
Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels
50.00
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Mechanical dampers
60.60
Fire resistance tests — Fire dampers for air distribution systems — Part 2: Intumescent dampers
60.60
Review of outputs for fire containment tests for buildings in the context of fire safety engineering
95.99
Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements
95.99
Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements
60.60
Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on classification and implementation methods
95.99
Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on classification and implementation methods
30.98
Determination of the resistance to jet fires of passive fire protection materials — Part 3: extended test requirements
20.00
Determination of the resistance to gas explosions of passive fire protection materials — Part 1: General requirements
60.60

No matching records found. Please try changing the filter settings.