Reference number
ISO 28927-13:2022
International Standard
ISO 28927-13:2022
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 13: Fastener driving tools
Edition 1
2022-02
Preview
ISO 28927-13:2022
75451
недоступно на русском языке
Опубликовано (Версия 1, 2022)

ISO 28927-13:2022

ISO 28927-13:2022
75451
Язык
Формат
CHF 129
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load.

This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins.

This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).

This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.

NOTE       Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.

Общая информация

  •  : Опубликовано
     : 2022-02
    : Опубликование международного стандарта [60.60]
  •  : 1
  • ISO/TC 118/SC 3
    13.160  25.140.10 
  • RSS обновления

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ