Тезис
ПредпросмотрISO/IEC 14776-326:2015(E) defines a Reduced Block Command set for logical block devices. The Reduced Block Commands along with the required SPC-2 commands and their restrictions described in this standard, fully specify the complete command set for RBC logical block devices. It provides a command set of reduced requirements and options from SCSI Block Commands (SBC) (ISO/IEC 14776-321) for block devices. The reduced command set is intended to more closely match the functionality required for simple block logical units. The specified commands place no restrictions on device performance. The initial focus of this command set was to enable rigid disks and removable media devices attached to Serial Bus and utilizing SBP-2 (ISO/IEC 14776-232) for command and control. This second edition cancels and replaces the first edition published in 2002 and constitutes a minor revision. This second edition provides additional explanations and corrects mistakes with respect to the first edition.
-
Текущий статус: PublishedДата публикации: 2015-09
-
Версия: 2
-
- ICS :
- 35.200 Interface and interconnection equipment
Приобрести данный стандарт
Формат | Язык | |
---|---|---|
std 1 166 | ||
std 2 166 | Бумажный |
- CHF166
Жизненный цикл
-
Ранее
WithdrawnISO/IEC 14776-326:2002
WithdrawnISO/IEC 14776-326:2002/Cor 1:2009
-
Сейчас
-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)
Будьте в курсе актуальных новостей ИСО
Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.