Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 2
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Determination of electrical properties of thin sheet and film
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the gas transmission rate of films and thin sheets under atmospheric pressure — Manometric method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of length and width
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of length and width
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of thickness by mechanical scanning
|
90.93 | ISO/TC 61/SC 11 |
Vulcanized rubber sheet, and fabrics coated with vulcanized rubber — Determination of transmission rate of volatile liquids (Gravimetric technique)
|
95.99 | ISO/TC 45/SC 2 |
Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)
|
95.99 | ISO/TC 45/SC 2 |
Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)
|
95.99 | ISO/TC 45/SC 2 |
Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)
|
90.93 | ISO/TC 45/SC 2 |
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of tear resistance — Part 2: Elmendorf method
|
90.93 | ISO/TC 61/SC 11 |
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 1: Staircase methods
|
90.93 | ISO/TC 61/SC 11 |
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test
|
95.99 | ISO/TC 61/SC 11 |
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test
|
90.92 | ISO/TC 61/SC 11 |
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test
|
40.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
|
95.99 | ISO/TC 61/SC 11 |
Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of the coefficients of friction
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of wetting tension
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of wetting tension — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of wetting tension
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting - Determination of cold-crack temperature
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of dimensional change on heating
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of blocking resistance
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of blocking resistance
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm
|
90.60 | ISO/TC 61/SC 11 |
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
|
90.60 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures — Determination of shrinkage stress and contraction stress
|
90.93 | ISO/TC 61/SC 11 |
Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods
|
60.60 | ISO/TC 61/SC 11 |
Extruded sheets of polyethylene (PE-HD) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Extruded sheets of polyethylene (PE-HD) — Requirements and test methods
|
60.60 | ISO/TC 61/SC 11 |
Extruded sheets of polypropylene (PP) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Extruded sheets of poly(vinylidene fluoride) (PVDF) — Requirements and test methods
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods
|
90.92 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure method
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure methods
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method
|
90.92 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method
|
40.00 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 1: Humidity detection sensor method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 2: Infrared detection sensor method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 4: Gas-chromatographic detection sensor method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 5: Pressure sensor method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 6: Atmospheric pressure ionization mass spectrometer method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 7: Calcium corrosion method
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Biaxially oriented polyamide (nylon) films
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Biaxially oriented poly(ethylene terephthalate) (PET) films
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films — Technical Corrigendum 1
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Cast polypropylene (PP) films
|
90.93 | ISO/TC 61/SC 11 |
Plastics — Soil biodegradable materials for mulch films for use in agriculture and horticulture — Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
|
95.99 | ISO/TC 61/SC 11 |
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
|
90.93 | ISO/TC 61/SC 11 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.