Mechanical testing in general, смотри 19.060
Mechanical testing of welded joints, смотри 25.160.40
Фильтр :
Стандарт и/или проект Этап ТК
Brinell hardness test for steel
95.99 ISO/TC 164/SC 3
Rockwell hardness test (B and C scales) for steel
95.99 ISO/TC 164/SC 3
Vickers hardness test for steel (Load 5 to 100 kgf)
95.99 ISO/TC 164/SC 3
Steel — Tensile testing
95.99 ISO/TC 164/SC 1
Steel — Charpy impact test (U-notch)
95.99 ISO/TC 164/SC 4
Izod impact test for steel
95.99 ISO/TC 164/SC 4
Bend test for steel
95.99 ISO/TC 164/SC 2
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
95.99 ISO/TC 164/SC 1
Simple bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
Reverse bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
Steel — Tensile testing of wire
95.99 ISO/TC 164/SC 1
Steel — Simple torsion testing of wire
95.99 ISO/TC 164/SC 2
Steel — Reverse bend testing of wire
95.99 ISO/TC 164/SC 2
Wrapping test for steel wire
95.99 ISO/TC 164/SC 2
Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100
95.99 ISO/TC 164/SC 3
Verification of Vickers hardness testing machines
95.99 ISO/TC 164
Load calibration of testing machines for tensile testing of steel
95.99 ISO/TC 164/SC 1
Metallic materials — Charpy pendulum impact test — Part 1: Test method
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 1: Test method
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 1: Test method
90.92 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 2: Verification of test machines
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
90.92 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
90.92 ISO/TC 164/SC 4
Steel — Charpy impact test (V-notch)
95.99 ISO/TC 164/SC 4
Modified Erichsen cupping test for steel sheet and strip
95.99 ISO/TC 164/SC 2
Metallic materials — Hardness test — Verification of Brinell hardness testing machines
95.99 ISO/TC 164/SC 3
Flanging test on steel tubes
95.99 ISO/TC 164/SC 2
Drift expanding test on steel tubes
95.99 ISO/TC 164/SC 2
Bend test on steel tubes
95.99 ISO/TC 164/SC 2
Brinell hardness test for grey cast iron
95.99 ISO/TC 25
Tensile testing of light metals and their alloys
95.99 ISO/TC 164/SC 1
Brinell hardness test for light metals and their alloys
95.99 ISO/TC 164/SC 3
Wickers hardness test for light metals and their alloys
95.99 ISO/TC 164/SC 3
Drift expanding test on copper and copper alloy tubes
95.99 ISO/TC 164/SC 2
Flattening test on steel tubes
95.99 ISO/TC 164/SC 2
Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
95.99 ISO/TC 164/SC 1
Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test
95.99 ISO/TC 164/SC 1
Non-interrupted creep testing of steel at elevated temperatures
95.99 ISO/TC 164/SC 1
Metallic materials — Uniaxial creep testing in tension — Method of test
95.99 ISO/TC 164/SC 1
Metallic materials — Uniaxial creep testing in tension — Method of test
95.99 ISO/TC 164/SC 1
Metallic materials — Uniaxial creep testing in tension — Method of test
60.60 ISO/TC 164/SC 1
Determination of proof stress and proving test for steel at elevated temperature
95.99 ISO/TC 17/SC 20
Creep stress rupture testing of steel at elevated temperatures
95.99 ISO/TC 164/SC 1
General principles for fatigue testing of metals
95.99 ISO/TC 164
Ring expanding test on steel tubes
95.99 ISO/TC 164/SC 2
Steel — Tensile testing of tubes
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
Calibration of elastic proving devices
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
90.93 ISO/TC 164/SC 1
Selection and preparation of samples and test pieces of wrought steels — Part 1: Samples and test pieces for mechanical test
95.99 ISO/TC 17/SC 20
Wrought steel — Selection and preparation of samples and test pieces
95.99 ISO/TC 17/SC 20
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
95.99 ISO/TC 17/SC 20
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing — Technical Corrigendum 1
95.99 ISO/TC 17/SC 20
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
95.99 ISO/TC 17/SC 20
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
90.93 ISO/TC 17/SC 20
Wrapping test for copper and copper alloy wire
95.99 ISO/TC 164/SC 2
Bend test for copper and copper alloys
95.99 ISO/TC 164/SC 2
Vickers hardness test for copper and copper alloys (Test loads from 2.5 to 50 kgf)
95.99 ISO/TC 164/SC 3
Tensile testing of copper and copper alloys
95.99 ISO/TC 164/SC 1
Tensile testing of copper and copper alloy tubes of circular section
95.99 ISO/TC 164/SC 1
Tensile testing of copper and copper alloy wire
95.99 ISO/TC 164/SC 1
Brinell hardness test for copper and copper alloys
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5
95.99 ISO/TC 164/SC 3
Tables of Vickers hardness values (HV) for metallic materials
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces
95.99 ISO/TC 164/SC 3
Verification of pendulum impact testing machines for testing steels
95.99 ISO/TC 164/SC 4
Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
95.99 ISO/TC 164/SC 3
Calibration of standardized blocks to be used for Vickers hardness testing machines
95.99 ISO/TC 164
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
Calibration of standardized blocks to be used for Rockwell B and C scale hardness testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
Verification of Rockwell B and C scale hardness testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Tensile testing at elevated temperature
95.99 ISO/TC 164/SC 1
Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
95.99 ISO/TC 164/SC 1
Metallic materials — Tensile testing at elevated temperature
95.99 ISO/TC 164/SC 1
Grey cast iron — Beam unnotched impact test
95.99 ISO/TC 25
Tensile testing of light metal and light metal alloy tubes
95.99 ISO/TC 164/SC 1
Drift expanding test on light metal and light metal alloy tubes
95.99 ISO/TC 164/SC 2
Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)
95.99 ISO/TC 164/SC 2
Flattening test on aluminium and aluminium alloy tubes
95.99 ISO/TC 164/SC 2
Tensile test for light metal and light metal alloy wires
95.99 ISO/TC 164/SC 1
Simple torsion test for aluminium and aluminium alloy wire
95.99 ISO/TC 164/SC 2
Wrapping test for aluminium and aluminium alloy wire
95.99 ISO/TC 164/SC 2
Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99 ISO/TC 164/SC 3
Rockwell superficial hardness test (N and T scales) for steel
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99 ISO/TC 164/SC 3
Verification of Rockwell superficial N and T scale hardness testing machines
95.99 ISO/TC 164/SC 3
Metals — Axial load fatigue testing
95.99 ISO/TC 164
Metallic materials — Fatigue testing — Axial force-controlled method
95.99 ISO/TC 164
Metallic materials — Fatigue testing — Axial force-controlled method
90.92 ISO/TC 164/SC 4
Metals — Rotating bar bending fatigue testing
95.99 ISO/TC 164
Metallic materials — Rotating bar bending fatigue testing
95.99 ISO/TC 164/SC 4
Metallic materials — Rotating bar bending fatigue testing
60.60 ISO/TC 164/SC 4
Steel — Torsional stress fatigue testing
95.99 ISO/TC 164
Metallic materials — Torque-controlled fatigue testing
95.99 ISO/TC 164/SC 4
Metallic materials — Torque-controlled fatigue testing
60.60 ISO/TC 164/SC 4
Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines
95.99 ISO/TC 164/SC 3
Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test
95.99 ISO/TC 164/SC 1
Copper and copper alloy tubes of circular section — Flattening test
95.99 ISO/TC 164/SC 2
Aluminium and aluminium alloys — Shear test for rivet wire and rivets
95.99 ISO/TC 164/SC 2
Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing
95.99 ISO/TC 79/SC 6
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
95.99 ISO/TC 17
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
95.99 ISO/TC 17/SC 20
Steel — Conversion of elongation values — Part 1: Carbon and low-alloy steels
60.60 ISO/TC 17/SC 20
Steel — Conversion of elongation values — Part 2: Austenitic steels
95.99 ISO/TC 17/SC 20
Steel — Conversion of elongation values — Part 2: Austenitic steels
60.60 ISO/TC 17/SC 20
Tensile testing systems — Determination of K-value
95.99 ISO/TC 164/SC 1
Copper and copper alloys — Reverse bend testing of wire
95.99 ISO/TC 164/SC 2
Copper and copper alloys — Simple torsion testing of wire
95.99 ISO/TC 164/SC 2
Copper and copper alloys — Rockwell superficial hardness test (N and T scales)
95.99 ISO/TC 164/SC 3
Copper and copper alloys — Rockwell hardness test (B, F and G scales)
95.99 ISO/TC 164/SC 3
Sintered metal bushes — Determination of radial crushing strength
95.99 ISO/TC 119/SC 3
Sintered metal bushes — Determination of radial crushing strength
95.99 ISO/TC 119/SC 3
Sintered metal bushings — Determination of radial crushing strength
90.93 ISO/TC 119/SC 3
Sintered metal materials (excluding hardmetal) — Tensile test pieces
95.99 ISO/TC 119/SC 3
Sintered metal materials (excluding hardmetal) — Tensile test pieces
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Tensile test pieces
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Tensile test pieces
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Tensile test pieces
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Tensile test pieces
60.60 ISO/TC 119/SC 3
Sintered metal materials and hardmetals — Determination of Young's modulus
95.99 ISO/TC 119
Sintered metal materials and hardmetals — Determination of Young modulus
90.93 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
90.92 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength — Amendment 1: Precision statement
60.60 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
30.60 ISO/TC 119/SC 3
Hardmetals — Determination of transverse rupture strength
95.99 ISO/TC 119/SC 4
Hardmetals — Determination of transverse rupture strength
90.93 ISO/TC 119/SC 4
Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method
90.93 ISO/TC 119/SC 4
Hardmetals — Rockwell hardness test (scale A) — Part 2: Preparation and calibration of standard test blocks
90.93 ISO/TC 119/SC 4
Hardmetals — Rockwell hardness test (Scale A)
95.99 ISO/TC 119/SC 4
Steel — Designation of test piece axes
95.99 ISO/TC 164/SC 4
Metallic materials — Designation of test specimen axes in relation to product texture
95.99 ISO/TC 164/SC 4
Metallic materials — Designation of test specimen axes in relation to product texture
60.60 ISO/TC 164/SC 4
Hardmetals — Vickers hardness test
95.99 ISO/TC 119/SC 4
Sintered metal materials, excluding hardmetals — Fatigue test pieces
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Fatigue test pieces
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Fatigue test pieces
90.93 ISO/TC 119/SC 3
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
95.99 ISO/TC 119
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
95.99 ISO/TC 119/SC 2
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
60.60 ISO/TC 119/SC 2
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness
90.93 ISO/TC 119/SC 3
Hardmetals — Compression test
95.99 ISO/TC 119/SC 4
Hardmetals — Compression test
90.60 ISO/TC 119/SC 4
Sintered ferrous materials, carburized or carbonitrided — Determination and verification of effective case depth by the Vickers microhardness testing method
95.99 ISO/TC 119/SC 3
Sintered ferrous materials, carburized or carbonitrided — Determination and verification of case-hardening depth by a micro-hardness test
90.93 ISO/TC 119/SC 3
Metallic materials — Knoop hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 1: Test method
60.60 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
90.93 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
90.93 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
95.99 ISO/TC 164/SC 3
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
90.93 ISO/TC 164/SC 3
Metallic materials — Hardness test — Knoop test
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Verification of Knoop hardness testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Knoop hardness testing machines
95.99 ISO/TC 164/SC 3
Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing
90.93 ISO/TC 26
Steel — Hardness conversions
95.99 ISO/TC 17/SC 20
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
90.93 ISO/TC 164/SC 4
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation
90.93 ISO/TC 164/SC 4
Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique
95.99 ISO/TC 164
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
95.99 ISO/TC 119/SC 3
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
60.60 ISO/TC 119/SC 3
Metallic materials — Brinell hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 1: Test method
90.92 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 1: Test method
40.60 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
40.60 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
40.60 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
95.99 ISO/TC 164/SC 3
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
90.93 ISO/TC 164/SC 3
Metallic materials — Hardness test — Brinell test
95.99 ISO/TC 164/SC 3
Metallic materials — Hardness test — Vickers test — Part 1: HV 5 to HV 100
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 1: Test method
60.60 ISO/TC 164/SC 3
Metallic materials — Hardness test — Vickers test — Part 2: HV 0,2 to less than HV 5
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 2: Verification of testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
90.93 ISO/TC 164/SC 3
Metallic materials — Hardness test — Vickers test — Part 3: Less than HV 0,2
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
90.93 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
95.99 ISO/TC 164/SC 3
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
90.93 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 1: Test method
60.60 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
60.60 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
Metallic materials — Hardness test — Rockwell test (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
95.99 ISO/TC 164/SC 1
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
95.99 ISO/TC 164/SC 1
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
60.60 ISO/TC 164/SC 1
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
95.99 ISO/TC 164/SC 1
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
90.92 ISO/TC 164/SC 1
Metallic materials — Tensile testing — Part 3: Method of test at low temperature
90.93 ISO/TC 164/SC 1
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
90.93 ISO/TC 164/SC 1
Metallic materials — Tensile testing
95.99 ISO/TC 164/SC 1
Metallic materials — Tensile testing at ambient temperature
95.99 ISO/TC 164/SC 1
Metallic materials — Tensile testing — Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces
50.00 ISO/TC 164/SC 1
Metallic materials — Bend test
95.99 ISO/TC 164/SC 2
Metallic materials — Bend test
95.99 ISO/TC 164/SC 2
Metallic materials — Bend test
95.99 ISO/TC 164/SC 2
Metallic materials — Bend test
60.60 ISO/TC 164/SC 2
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines
95.99 ISO/TC 164/SC 1
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99 ISO/TC 164/SC 1
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99 ISO/TC 164/SC 1
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system — Technical Corrigendum 1
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
90.93 ISO/TC 164/SC 1
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load
95.99 ISO/TC 164/SC 1
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force
90.93 ISO/TC 164/SC 1
Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test
90.60 ISO/TC 164/SC 2
Metallic materials — Wire — Simple torsion test
95.99 ISO/TC 164/SC 2
Metallic materials — Wire — Simple torsion test
95.99 ISO/TC 164/SC 2
Metallic materials — Wire — Simple torsion test
90.93 ISO/TC 164/SC 2
Metallic materials — Wire — Reverse bend test
90.92 ISO/TC 164/SC 2
Metallic materials — Wire — Reverse bend test
40.60 ISO/TC 164/SC 2
Metallic materials — Wire — Wrapping test
95.99 ISO/TC 164/SC 2
Metallic materials — Wire — Wrapping test
90.60 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Modified Erichsen cupping test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube (in full section) — Bend test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube (in full section) — Bend test
90.93 ISO/TC 164/SC 2
Metallic materials — Tube — Flattening test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Flattening test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Flattening test
90.93 ISO/TC 164/SC 2
Metallic materials — Tube — Drift-expanding test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Drift-expanding test
90.93 ISO/TC 164/SC 2
Metallic materials — Tube — Flanging test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Flanging test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Flanging test
90.93 ISO/TC 164/SC 2
Metallic materials — Tube — Ring-expanding test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Ring-expanding test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Ring-expanding test
90.93 ISO/TC 164/SC 2
Metallic materials — Tube — Ring tensile test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Ring tensile test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube — Ring tensile test
90.93 ISO/TC 164/SC 2
Metallic materials — Verification of extensometers used in uniaxial testing
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration of extensometers used in uniaxial testing
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1
95.99 ISO/TC 164/SC 1
Metallic materials — Calibration of extensometer systems used in uniaxial testing
90.93 ISO/TC 164/SC 1
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1
60.60 ISO/TC 164/SC 1
Metallic materials — Wire — Reverse torsion test
95.99 ISO/TC 164/SC 2
Metallic materials — Wire — Reverse torsion test
95.99 ISO/TC 164/SC 2
Metallic materials — Wire — Reverse torsion test
60.60 ISO/TC 164/SC 2
Steel — Conversion of hardness values to tensile strength values
95.99 ISO/TC 17/SC 20
Metallic materials — Sheet and strip — Determination of plastic strain ratio
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of plastic strain ratio
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of plastic strain ratio
60.60 ISO/TC 164/SC 2
Metallic materials — Hardness testing — Tables of Knoop hardness values for use in tests made on flat surfaces
95.99 ISO/TC 164/SC 3
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
60.60 ISO/TC 164/SC 2
Metallic materials — Earing test
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Earing test
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Earing test
60.60 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop
95.99 ISO/TC 164/SC 2
Metallic materials — Determination of forming-limit curves for sheet and strip — Part 1: Measurement and application of forming-limit diagrams in the press shop
60.60 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory
95.99 ISO/TC 164/SC 2
Metallic materials — Determination of forming-limit curves for sheet and strip — Part 2: Determination of forming-limit curves in the laboratory
60.60 ISO/TC 164/SC 2
Metallic materials — Guidelines for the determination of forming-limit diagrams
95.99 ISO/TC 164/SC 2
Metallic materials — Fatigue testing — General principles
30.60 ISO/TC 164/SC 4
Metallic materials — Fatigue testing — Axial-strain-controlled method
95.99 ISO/TC 164
Metallic materials — Fatigue testing — Axial-strain-controlled method
90.92 ISO/TC 164/SC 4
Metallic materials — Fatigue testing — Statistical planning and analysis of data
95.99 ISO/TC 164
Metallic materials — Fatigue testing — Statistical planning and analysis of data
90.92 ISO/TC 164/SC 4
Metallic materials — Fatigue testing — Fatigue crack growth method
95.99 ISO/TC 164
Metallic materials — Fatigue testing — Fatigue crack growth method
95.99 ISO/TC 164/SC 4
Metallic materials — Fatigue testing — Fatigue crack growth method
90.60 ISO/TC 164/SC 4
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements
90.60 ISO/TC 164/SC 4
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods
90.60 ISO/TC 164/SC 4
Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
90.93 ISO/TC 164/SC 4
Metallic materials — Principles and designs for multiaxial fatigue testing
60.60 ISO/TC 164/SC 4
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
95.99 ISO/TC 164/SC 4
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness — Technical Corrigendum 1
95.99 ISO/TC 164/SC 4
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
95.99 ISO/TC 164/SC 4
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
60.60 ISO/TC 164/SC 4
Mechanical testing of metals — Symbols used with their definitions — Part 1: Symbols and definitions in published standards
95.99 ISO/TC 164
Mechanical testing of metals — Symbols used with their definitions — Part 2: Recommendations for the development of symbols and definitions
95.99 ISO/TC 164
Metallic materials — Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
Metallic materials — Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
Metallic materials — Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals
90.93 ISO/TC 164/SC 2
Sintered metal materials excluding hardmetals — Determination of compressive yield strength
95.99 ISO/TC 119/SC 3
Sintered metal materials excluding hardmetals — Determination of compressive yield strength
90.93 ISO/TC 119/SC 3
Steel — Charpy V-notch pendulum impact test — Instrumented test method
95.99 ISO/TC 164/SC 4
Steel — Charpy V-notch pendulum impact test — Instrumented test method — Amendment 1: Annex D — Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
95.99 ISO/TC 164/SC 4
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
60.60 ISO/TC 164/SC 4
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
95.99 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
90.92 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
30.99 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
30.99 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
30.99 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
95.99 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
90.93 ISO/TC 164/SC 3
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
60.60 ISO/TC 164/SC 3
Metallic materials — Hardness test — Universal test
95.99 ISO/TC 164/SC 3
Metallic materials — Strain analysis report
95.99 ISO/TC 164/SC 2
Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue
30.60 ISO/TC 164/SC 4
Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
60.60 ISO/TC 164/SC 1
Metallic materials — Tube ring hydraulic pressure test
95.99 ISO/TC 164/SC 2
Metallic materials — Tube ring hydraulic pressure test
90.93 ISO/TC 164/SC 2
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
90.60 ISO/TC 17/SC 10
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
95.99 ISO/TC 17/SC 10
Metallic materials — Tensile testing at low temperature
95.99 ISO/TC 164/SC 1
Metallic materials — Sheet and strip — Hole expanding test
95.99 ISO/TC 164/SC 2
Metallic materials — Method of hole expanding test
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Hole expanding test
90.92 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Hole expanding test
30.60 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
60.60 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
60.60 ISO/TC 164/SC 2
Metallic materials — Leeb hardness test — Part 1: Test method
90.93 ISO/TC 164/SC 3
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
90.93 ISO/TC 164/SC 3
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
90.93 ISO/TC 164/SC 3
Metallic materials — Ductility testing — High speed compression test for porous and cellular metals
95.99 ISO/TC 164/SC 2
Metallic materials — Ductility testing — High speed compression test for porous and cellular metals
60.60 ISO/TC 164/SC 2
Metallic materials — Conversion of hardness values
95.99 ISO/TC 164/SC 3
Metallic materials — Conversion of hardness values
90.93 ISO/TC 164/SC 3
Metallic materials — Torsion test at ambient temperature
95.99 ISO/TC 164/SC 2
Metallic materials — Torsion test at room temperature
60.60 ISO/TC 164/SC 2
Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
60.60 ISO/TC 164/SC 3
Metallic materials — Tensile testing in liquid helium
95.99 ISO/TC 164/SC 1
Method for evaluation of tensile properties of metallic superplastic materials
95.99 ISO/TC 164/SC 2
Method for evaluation of tensile properties of metallic superplastic materials
90.60 ISO/TC 164/SC 2
Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca
60.60 ISO/TC 164/SC 4
Metallic materials — Steel — Method of test for the determination of brittle crack arrest temperature (CAT)
30.60 ISO/TC 164/SC 4
Metallic materials — Sheet and strip — Erichsen cupping test
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Erichsen cupping test
90.60 ISO/TC 164/SC 2
Temperature verification method applied to dynamic fatigue testing
60.60 ISO/TC 164/SC 4
Hardmetals — Knoop hardness test
95.99 ISO/TC 119/SC 4
Metallic materials — Fatigue testing — Axial plane bending method
60.60 ISO/TC 164/SC 4
Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
95.99 ISO/TC 164/SC 4
Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
90.93 ISO/TC 164/SC 4
Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method
90.92 ISO/TC 164/SC 4
Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method
30.60 ISO/TC 164/SC 4
Metallic materials — Mechanical testing — Vocabulary
90.92 ISO/TC 164
Metallic materials — Verification of the alignment of fatigue testing machines
90.60 ISO/TC 164/SC 4
Metallic materials — High strain rate torsion test at room temperature
60.60 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
95.99 ISO/TC 164/SC 2
Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
90.93 ISO/TC 164/SC 2
Mechanical testing of metals — Symbols and definitions in published standards
95.99 ISO/TC 164
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
95.99 ISO/TC 164/SC 1
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
90.92 ISO/TC 164/SC 1
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
90.93 ISO/TC 164/SC 1
Metallic materials — Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
90.92 ISO/TC 164/SC 4
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
95.99 ISO/TC 164/SC 4
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
90.93 ISO/TC 164/SC 4
Hardmetals — Palmqvist toughness test
90.92 ISO/TC 119/SC 4
Hardmetals — Abrasion tests for hardmetals
95.99 ISO/TC 119/SC 4
Hardmetals — Abrasion tests for hardmetals
60.60 ISO/TC 119/SC 4
Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties
90.93 ISO/TC 164/SC 3

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.