Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Polycrystalline materials — Determination of residual stresses by neutron diffraction
|
95.99 | ISO/TC 135/SC 5 |
Measurement of thermal conductivity of thin films on silicon substrates
|
95.99 | ISO/TC 61/SC 5 |
Radiographic image quality indicators for non-destructive testing — Principles and identification
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Ultrasonic testing — Specification for standard block No. 1
|
50.00 | ISO/TC 135/SC 3 |
Non-destructive testing — Metallographic replica techniques of surface examination
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Metallographic replica techniques of surface examination
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Method for indirect assessment of black light sources
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing and magnetic particle testing - Viewing conditions
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
|
90.92 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 1: General principles
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 1: General principles
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 1: General principles
|
60.60 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
|
60.60 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 3: Reference test blocks
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 3: Reference test blocks — Technical Corrigendum 1: .
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 3: Reference test blocks
|
90.92 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 4: Equipment
|
90.60 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 degrees C
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 degrees C
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant inspection — General principles
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Liquid penetrant inspection — Means of verification
|
95.99 | ISO/TC 135/SC 2 |
Radiation protection — Apparatus for industrial gamma radiography — Part 1: Specifications for performance, design and tests
|
95.99 | ISO/TC 85/SC 2 |
Apparatus for gamma radiography — Specification
|
95.99 | ISO/TC 85 |
Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests
|
90.60 | ISO/TC 85/SC 2 |
Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Industrial X-ray and gamma-ray radiology — Vocabulary
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Ultrasonic inspection — Vocabulary
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Vocabulary
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Vocabulary
|
40.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Industrial radiographic illuminators — Minimum requirements
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Industrial radiographic illuminators — Minimum requirements
|
60.60 | ISO/TC 135/SC 5 |
Photography — Film for industrial radiography — Sizes, quantity packaging and labelling
|
95.99 | ISO/TC 42 |
Railway infrastructure — Non-destructive testing on rails in track — Part 1: Requirements for ultrasonic testing and evaluation principles
|
60.60 | ISO/TC 269/SC 1 |
Non-destructive testing — Leak testing — Radioactive tracer methods for pressured vessels and underground pipelines
|
40.60 | ISO/TC 135/SC 6 |
Non-destructive testing — Qualification and certification of personnel
|
95.99 | ISO/TC 135/SC 7 |
Non-destructive testing — Qualification and certification of personnel
|
95.99 | ISO/TC 135/SC 7 |
Non-destructive testing — Qualification and certification of personnel
|
95.99 | ISO/TC 135/SC 7 |
Non-destructive testing — Qualification and certification of personnel — Technical Corrigendum 1
|
95.99 | ISO/TC 135/SC 7 |
Non-destructive testing — Qualification and certification of NDT personnel
|
95.99 | ISO/TC 135/SC 7 |
Non-destructive testing — Qualification and certification of NDT personnel
|
60.60 | ISO/TC 135/SC 7 |
Non-destructive testing — Magnetic particle testing — Part 1: General principles
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Magnetic particle testing — Part 1: General principles
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Magnetic particle testing — Part 1: General principles
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Magnetic particle testing — Part 2: Detection media
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Magnetic particle testing — Part 2: Detection media
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Magnetic particle testing — Part 3: Equipment
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Magnetic particle testing — Part 3: Equipment
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant flaw detectors — General technical requirements
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Infrared thermography — Vocabulary
|
90.92 | ISO/TC 135/SC 8 |
Non-destructive testing — Infrared thermographic testing — General principles
|
90.60 | ISO/TC 135/SC 8 |
Non-destructive testing — Thermal neutron radiographic testing — General principles and basic rules
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Performance-based qualification
|
90.93 | ISO/TC 135/SC 7 |
Non-destructive testing — Terminology - Terms used in penetrant testing
|
95.99 | ISO/TC 135/SC 2 |
Non-destructive testing — Penetrant testing — Vocabulary
|
90.60 | ISO/TC 135/SC 2 |
Non-destructive testing — Magnetic particle testing — Vocabulary
|
90.93 | ISO/TC 135/SC 2 |
Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
|
90.93 | ISO/TC 135/SC 9 |
Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission sensors
|
90.93 | ISO/TC 135/SC 9 |
Ultrasonic non-destructive testing — Reference blocks and test procedures for the characterization of contact search unit beam profiles
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Acoustic emission inspection — Vocabulary
|
90.92 | ISO/TC 135/SC 9 |
Non-destructive testing — Eddy current testing — Vocabulary
|
95.99 | ISO/TC 135/SC 4 |
Non-destructive testing — Eddy current testing — Vocabulary
|
90.93 | ISO/TC 135/SC 4 |
Non-destructive testing — Thermal neutron radiographic testing — Determination of beam L/D ratio
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
|
60.60 | ISO/TC 135/SC 9 |
Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification
|
95.99 | ISO/TC 135/SC 4 |
Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification — Technical Corrigendum 1
|
95.99 | ISO/TC 135/SC 4 |
Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification
|
90.92 | ISO/TC 135/SC 4 |
Non-destructive testing — Equipment for eddy current examination — Part 2: Probe characteristics and verification
|
95.99 | ISO/TC 135/SC 4 |
Non-destructive testing — Equipment for eddy current examination — Part 2: Probe characteristics and verification
|
90.60 | ISO/TC 135/SC 4 |
Non-destructive testing — Equipment for eddy current examination — Part 3: System characteristics and verification
|
90.60 | ISO/TC 135/SC 4 |
Non-destructive testing — Eddy current testing — General principles
|
95.99 | ISO/TC 135/SC 4 |
Non-destructive testing — Eddy current testing — General principles
|
90.60 | ISO/TC 135/SC 4 |
Non-destructive testing — Radiation methods — Computed tomography — Part 1: Principles
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 1: Terminology
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 1: Vocabulary
|
60.60 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods — Computed tomography — Part 2: Examination practices
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 2: Principles, equipment and samples
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 2: Principles, equipment and samples
|
60.00 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation
|
40.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 4: Qualification
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiation methods for computed tomography — Part 4: Qualification
|
40.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 2: General principles for testing of metallic materials using X-rays and gamma rays
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 1: Voltage divider method
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 2: Constancy check by the thick filter method
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 3: Spectrometric method
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Ultrasonic thickness measurement
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic thickness measurement
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic thickness determination
|
40.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — General principles
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — General principles
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
|
50.20 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Transmission technique
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Through-transmission technique
|
60.00 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Testing for discontinuities perpendicular to the surface
|
50.20 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
|
40.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique for detection and sizing of discontinuities
|
40.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Automated ultrasonic testing — Selection and application of systems
|
90.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
|
90.92 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic equipment for the determination of thickness
|
50.00 | ISO/TC 135/SC 3 |
Non-destructive testing — Acoustic emission testing — Measurement method for acoustic emission signals in concrete
|
90.93 | ISO/TC 135/SC 9 |
Non-destructive testing — Acoustic emission testing — Test method for damage qualification of reinforced concrete beams
|
90.93 | ISO/TC 135/SC 9 |
Non-destructive testing — Acoustic emission testing — Test method for classification of active cracks in concrete structures
|
90.93 | ISO/TC 135/SC 9 |
Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Specification for a step wedge standard block
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
|
95.99 | ISO/TC 44/SC 5 |
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
|
60.60 | ISO/TC 44/SC 5 |
Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
|
95.99 | ISO/TC 135/SC 9 |
Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
|
60.60 | ISO/TC 135/SC 9 |
Non-destructive testing — General terms and definitions
|
90.92 | ISO/TC 135 |
Non-destructive testing — Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
|
90.93 | IIW |
Non-destructive testing — Acoustic emission testing — Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers
|
90.93 | ISO/TC 135/SC 9 |
Non-destructive testing — Infrared thermography — Part 1: Characteristics of system and equipment
|
90.60 | ISO/TC 135/SC 8 |
Non-destructive testing — Infrared thermography — Part 2: Test method for integrated performance of system and equipment
|
60.60 | ISO/TC 135/SC 8 |
Non-destructive testing — Evaluation of vision acuity of NDT personnel
|
90.92 | ISO/TC 135/SC 7 |
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Probes
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Array probes
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems
|
95.99 | ISO/TC 135/SC 3 |
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Complete systems
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Image quality of radiographs — Part 1: Image quality indicators (wire type) — Determination of image quality value
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 1: Image quality indicators (wire type) — Determination of image quality value — Technical Corrigendum 1
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 2: Image quality indicators (step/hole type) — Determination of image quality value
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 2: Image quality indicators (step/hole type) — Determination of image quality value — Technical Corrigendum 1
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes for ferrous metals
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 3: Image quality values
|
40.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 4: Experimental evaluation of image quality values and image quality tables
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 4: Experimental evaluation of image quality values and image quality tables
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 5: Image quality indicators (duplex wire type) — Determination of image unsharpness value
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
|
90.93 | ISO/TC 135/SC 5 |
Non-destructive testing — Ultrasonic testing — Specification for a calibration block for phased array testing (PAUT)
|
90.93 | IIW |
Non-destructive testing — Acoustic emission testing — Steel structures of overhead travelling cranes and portal bridge cranes
|
90.93 | ISO/TC 135/SC 9 |
Non-destructive testing — Equipment for eddy current examination — Array probe characteristics and verification
|
90.93 | ISO/TC 135/SC 4 |
Non-destructive testing — Leak testing — Vocabulary
|
90.60 | ISO/TC 135/SC 6 |
Non-destructive testing — Leak testing — Tracer gas method
|
90.60 | ISO/TC 135/SC 6 |
Non-destructive testing — Leak testing — Calibration of reference leaks for gases
|
90.60 | ISO/TC 135/SC 6 |
Non-destructive testing — Pulsed eddy current testing of ferromagnetic metallic components
|
90.60 | ISO/TC 135/SC 4 |
Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 1: Tangential radiographic inspection
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 2: Double wall radiographic inspection
|
90.92 | ISO/TC 135/SC 5 |
Non-destructive testing — Qualification of personnel for limited application of non-destructive testing
|
90.93 | ISO/TC 135/SC 7 |
Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
|
90.20 | ISO/TC 135/SC 5 |
Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction — Technical Corrigendum 1
|
95.99 | ISO/TC 135/SC 5 |
Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Infrared thermographic testing — General principles for thermoelastic stress measuring method
|
60.60 | ISO/TC 135/SC 8 |
Non-destructive testing — Discontinuities in specimens for use in qualification examinations
|
90.93 | ISO/TC 135/SC 7 |
Non-destructive testing — Gamma ray scanning method on process columns
|
60.60 | ISO/TC 135/SC 5 |
Non-destructive testing — Ultrasonic testing with arrays — Vocabulary
|
60.60 | ISO/TC 135/SC 3 |
Jewellery and precious metals — Non destructive precious metal fineness confirmation by ED-XRF
|
60.60 | ISO/TC 174 |
Non-destructive testing — Ultrasonic testing — General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
|
60.60 | IIW |
Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
|
60.60 | ISO/TC 135/SC 9 |
Non-destructive testing — Acoustic emission testing — Detection of corrosion at atmospheric and low-pressure metallic storage tank floors
|
60.60 | ISO/TC 135/SC 9 |
Non-destructive testing — Acoustic emission testing — Verification of the receiving sensitivity spectra of piezoelectric acoustic emission sensors
|
60.60 | ISO/TC 135/SC 9 |
Non-destructive testing — Robotic ultrasonic test systems — General requirements
|
60.60 | ISO/TC 135/SC 3 |
Non-destructive testing — Guidelines for NDT training syllabuses
|
95.99 | ISO/TC 135 |
Non-destructive testing — NDT training syllabuses
|
90.93 | ISO/TC 135/SC 7 |
Non-destructive testing — Guidelines for NDT personnel training organizations
|
95.99 | ISO/TC 135 |
Non-destructive testing — NDT personnel training organizations
|
90.92 | ISO/TC 135/SC 7 |
Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 1: Pinhole camera radiographic method
|
60.60 | ISO/TC 135/SC 5 |
Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 2: Edge method with hole type gauges
|
40.20 | ISO/TC 135/SC 5 |
Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 3: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
|
40.00 | ISO/TC 135/SC 5 |
Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
|
60.60 | ISO/TC 135/SC 5 |
Additive manufacturing for metals — Non-destructive testing and evaluation — Imperfections classification in PBF parts
|
40.60 | ISO/TC 261 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.