Фильтр :
Стандарт и/или проект Этап ТК
Withdrawal of ISO/R 645-1967
95.99 ISO/TC 69
Withdrawal of ISO/R 1786-1970
95.99 ISO/TC 69
Statistical interpretation of test results — Estimation of the mean — Confidence interval
90.93 ISO/TC 69
Statistical interpretation of data — Techniques of estimation and tests relating to means and variances
90.93 ISO/TC 69
Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection — Technical Corrigendum 1
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
90.92 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection — Amendment 1
60.60 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection — Technical Corrigendum 1
60.60 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
40.20 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
60.60 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
90.93 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of stated quality levels
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels
60.60 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
90.60 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
95.99 ISO/TC 69/SC 5
Sampling procedures and tables for inspection by attributes
95.99 ISO/TC 69
Sampling procedures and tables for inspection by attributes — Addendum 1
95.99 ISO/TC 69
Statistical interpretation of data — Determination of a statistical tolerance interval
95.99 ISO/TC 69
Statistical interpretation of data — Determination of a statistical tolerance interval — Addendum 1
95.99 ISO/TC 69
Statistical interpretation of data — Comparison of two means in the case of paired observations
90.93 ISO/TC 69
Statistical interpretation of data — Power of tests relating to means and variances
90.93 ISO/TC 69
Statistics — Vocabulary and symbols — Part 1: Probability and general statistical terms
95.99 ISO/TC 69
Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability
90.60 ISO/TC 69
Statistics — Vocabulary and symbols — Part 2: Statistical quality control
95.99 ISO/TC 69
Statistics — Vocabulary and symbols — Part 2: Applied statistics
90.60 ISO/TC 69
Statistics — Vocabulary and symbols — Part 3: Design of experiments
95.99 ISO/TC 69
Statistics — Vocabulary and symbols — Part 3: Design of experiments
95.99 ISO/TC 69
Statistics — Vocabulary and symbols — Part 3: Design of experiments
90.93 ISO/TC 69
Statistics — Vocabulary and symbols — Part 4: Survey sampling
90.60 ISO/TC 69
Statistics — Vocabulary and symbols
95.99 ISO/TC 69
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
60.60 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics — Amendment 1
95.99 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
90.60 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
90.93 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels
90.93 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
90.93 ISO/TC 69/SC 5
Sampling procedures for inspection by variables — Part 6: Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ)
60.60 ISO/TC 69/SC 5
Sampling procedures and charts for inspection by variables for percent defective
95.99 ISO/TC 69
Sampling procedures and charts for inspection by variables for percent nonconforming
95.99 ISO/TC 69/SC 5
Statistical interpretation of data — Tests for departure from the normal distribution
90.60 ISO/TC 69
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
95.99 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions — Technical Corrigendum 1
95.99 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
60.60 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
95.99 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method — Technical Corrigendum 1
95.99 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
90.92 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
40.20 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
95.99 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method — Technical Corrigendum 1
95.99 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
60.60 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
95.99 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
60.60 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
90.92 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method — Technical Corrigendum 1
60.60 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
40.20 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
90.92 ISO/TC 69/SC 6
Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values — Technical Corrigendum 1
60.60 ISO/TC 69/SC 6
Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests
95.99 ISO/TC 69
Precision of test methods — Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
95.99 ISO/TC 69/SC 6
Control charts — Part 1: General guidelines
95.99 ISO/TC 69/SC 4
Control charts — Part 1: General guidelines
95.99 ISO/TC 69/SC 4
Control charts — Part 1: General guidelines
90.20 ISO/TC 69/SC 4
Control charts — Part 2: Shewhart control charts
95.99 ISO/TC 69/SC 4
Control charts — Part 2: Shewhart control charts
60.60 ISO/TC 69/SC 4
Control charts — Part 3: Acceptance control charts
95.99 ISO/TC 69/SC 4
Control charts — Part 3: Acceptance control charts
60.60 ISO/TC 69/SC 4
Control charts — Part 4: Cumulative sum charts
95.99 ISO/TC 69/SC 4
Control charts — Part 4: Cumulative sum charts
60.60 ISO/TC 69/SC 4
Control charts — Part 5: Specialized control charts
90.92 ISO/TC 69/SC 4
Control charts — Part 6: EWMA control charts
95.99 ISO/TC 69/SC 4
Control charts — Part 6: EWMA control charts for the process mean
60.60 ISO/TC 69/SC 4
Control charts — Part 7: Multivariate control charts
60.60 ISO/TC 69/SC 4
Control charts — Part 8: Charting techniques for short runs and small mixed batches
90.93 ISO/TC 69/SC 4
Control charts — Part 9: Control charts for stationary processes
60.60 ISO/TC 69/SC 4
Control charts — General guide and introduction
95.99 ISO/TC 69/SC 4
Cumulative sum charts — Guidance on quality control and data analysis using CUSUM techniques
95.99 ISO/TC 69/SC 4
Control charts for arithmetic average with warning limits
95.99 ISO/TC 69/SC 4
Acceptance control charts
95.99 ISO/TC 69/SC 4
Shewhart control charts
95.99 ISO/TC 69/SC 4
Shewhart control charts — Technical Corrigendum 1
95.99 ISO/TC 69/SC 4
Sequential sampling plans for inspection by attributes
95.99 ISO/TC 69/SC 5
Sequential sampling plans for inspection by attributes — Technical Corrigendum 1
95.99 ISO/TC 69/SC 5
Sequential sampling plans for inspection by attributes
95.99 ISO/TC 69/SC 5
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
95.99 ISO/TC 69/SC 5
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) — Technical Corrigendum 1
95.99 ISO/TC 69/SC 5
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
95.99 ISO/TC 69/SC 5
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 1: Acceptance sampling
90.93 ISO/TC 69/SC 5
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 2: Sampling by attributes
90.93 ISO/TC 69/SC 5
Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 3: Sampling by variables
90.93 ISO/TC 69/SC 5
Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
95.99 ISO/TC 69/SC 5
Interpretation of statistical data — Estimation of a median
95.99 ISO/TC 69
Quality management — Guidance on statistical techniques for ISO 9001:2015
60.60 ISO/TC 176/SC 3
Guidance on statistical techniques for ISO 9001:1994
95.99 ISO/TC 176/SC 3
Guidance on statistical techniques for ISO 9001:2000
95.99 ISO/TC 176/SC 3
Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
95.99 ISO/TC 69/SC 6
Statistical methods — Guidelines for the evaluation of conformity with specified requirements
60.60 ISO/TC 69/SC 6
Acceptance sampling plans and procedures for the inspection of bulk materials
90.93 ISO/TC 69/SC 6
Linear calibration using reference materials
90.93 ISO/TC 69/SC 6
Statistical interpretation of data — Tests and confidence intervals relating to proportions
90.93 ISO/TC 69
Statistical interpretation of data — Tests and confidence intervals relating to proportions — Technical Corrigendum 1
60.60 ISO/TC 69
Guidelines for implementation of statistical process control (SPC) — Part 1: Elements of SPC
90.92 ISO/TC 69/SC 4
Guidelines for implementation of statistical process control (SPC) — Part 1: Elements of SPC
30.60 ISO/TC 69/SC 4
Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques
90.92 ISO/TC 69/SC 4
Guidelines for implementation of statistical process control (SPC) — Part 3: Reference data sets for SPC software validation
60.60 ISO/TC 69/SC 4
Guidelines for implementation of statistical process control (SPC) — Part 4: Reference data sets for measurement process analysis software validation
60.60 ISO/TC 69/SC 4
Guidelines for implementation of statistical process control (SPC) — Part 5: Quality data exchange format for SPC software
60.60 ISO/TC 69/SC 4
Statistical aspects of sampling from bulk materials — Part 1: General principles
90.60 ISO/TC 69/SC 5
Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials
90.93 ISO/TC 69/SC 6
Capability of detection — Part 1: Terms and definitions
90.92 ISO/TC 69/SC 6
Capability of detection — Part 1: Terms and definitions — Technical Corrigendum 1
60.60 ISO/TC 69/SC 6
Capability of detection — Part 2: Methodology in the linear calibration case
90.93 ISO/TC 69/SC 6
Capability of detection — Part 2: Methodology in the linear calibration case — Technical Corrigendum 1
60.60 ISO/TC 69/SC 6
Capability of detection — Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
90.93 ISO/TC 69/SC 6
Capability of detection — Part 4: Methodology for comparing the minimum detectable value with a given value
90.93 ISO/TC 69/SC 6
Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
90.93 ISO/TC 69/SC 6
Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1
60.60 ISO/TC 69/SC 6
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
95.99 ISO/TC 69/SC 6
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
90.92 ISO/TC 69/SC 6
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
40.00 ISO/TC 69/SC 6
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
95.99 ISO/TC 69/SC 6
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
90.92 ISO/TC 69/SC 6
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
40.60 ISO/TC 69/SC 6
Capability of detection — Part 8: Guidance for the implementation of the ISO 11843 series
60.60 ISO/TC 69/SC 6
Selected illustrations of fractional factorial screening experiments
90.93 ISO/TC 69/SC 7
Selected illustrations of gauge repeatability and reproducibility studies
90.93 ISO/TC 69/SC 7
Quantitative methods in process improvement — Six Sigma — Part 1: DMAIC methodology
90.93 ISO/TC 69/SC 7
Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques
90.93 ISO/TC 69/SC 7
Selected illustrations of response surface method — Central composite design
90.93 ISO/TC 69/SC 7
Guide for the selection of statistical methods in standardization and specification
95.99 ISO/TC 69
Guidelines for the selection of statistical methods in standardization and specification
95.99 ISO/TC 69
Guidelines for the selection of statistical methods in standardization and specification
95.99 ISO/TC 69
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach
95.99 ISO/TC 69/SC 5
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
95.99 ISO/TC 69/SC 5
Guidance on the development and use of ISO statistical publications supported by software
60.60 ISO/TC 69
Statistical methods for use in proficiency testing by interlaboratory comparisons
95.99 ISO/TC 69/SC 6
Statistical methods for use in proficiency testing by interlaboratory comparison
95.99 ISO/TC 69/SC 6
Statistical methods for use in proficiency testing by interlaboratory comparison
60.60 ISO/TC 69/SC 6
Statistical methods for use in proficiency testing by interlaboratory comparison — Amendment 1
30.99 ISO/TC 69/SC 6
Three statistical approaches for the assessment and interpretation of measurement uncertainty
60.60 ISO/TC 69/SC 6
Selected illustrations of attribute agreement analysis
90.93 ISO/TC 69/SC 7
Acceptance sampling procedures by attributes — Specified quality levels in nonconforming items per million
95.99 ISO/TC 69/SC 5
Statistical interpretation of data — Part 4: Detection and treatment of outliers
90.93 ISO/TC 69
Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals
95.99 ISO/TC 69
Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals
90.60 ISO/TC 69
Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals
90.60 ISO/TC 69
Statistical interpretation of data — Part 8: Determination of prediction intervals
90.93 ISO/TC 69
Applications of statistical and related methods to new technology and product development process — Robust parameter design (RPD)
90.93 ISO/TC 69/SC 8
Application of statistical and related methods to new technology and product development process — Robust tolerance design (RTD)
60.60 ISO/TC 69/SC 8
Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality Function Deployment (QFD)
95.99 ISO/TC 69/SC 8
Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of quality function deployment (QFD)
60.60 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
90.93 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder
90.92 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder
40.20 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
90.93 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 5: Solution strategy
90.93 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 6: Guidance for QFD-related approaches to optimization
90.93 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 7: Guidelines for developing digitalized products and services — General principles and perspectives of the QFD method
60.60 ISO/TC 69/SC 8
Applications of statistical and related methods to new technology and product development process — Part 8: Guidelines for commercialization and life cycle
60.60 ISO/TC 69/SC 8
Statistical methods for implementation of Six Sigma — Selected illustrations of contingency table analysis
60.60 ISO/TC 69/SC 7
Statistical methods — Six Sigma — Basic criteria underlying benchmarking for Six Sigma in organisations
90.93 ISO/TC 69/SC 7
Quantitative methods in process improvement — Six Sigma — Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
90.92 ISO/TC 69/SC 7
Acceptance sampling procedures by attributes — Accept-zero sampling system based on credit principle for controlling outgoing quality
95.99 ISO/TC 69/SC 5
Guidance on the application of statistical methods to quality and to industrial standardization
60.60 ISO/TC 69
Statistical methods for implementation of Six Sigma — Selected illustrations of distribution identification studies
60.60 ISO/TC 69/SC 7
Combined accept-zero sampling systems and process control procedures for product acceptance
95.99 ISO/TC 69/SC 5
Statistical methods — Process performance and capability statistics for measured quality characteristics
95.99 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 1: General principles and concepts
95.99 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 1: General principles and concepts
90.93 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
95.99 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
90.92 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
40.20 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts
95.99 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts
60.60 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures
90.93 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures
95.99 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics
90.93 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 6: Process capability statistics for characteristics following a multivariate normal distribution
90.93 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes
95.99 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes
90.92 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes — Amendment 1
60.60 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes
40.00 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process
90.93 ISO/TC 69/SC 4
Statistical methods in process management — Capability and performance — Part 9: Process capability statistics for characteristics defined by geometrical specifications
60.60 ISO/TC 69/SC 4
Statistical methods for implementation of Six Sigma — Selected illustration of analysis of variance
60.60 ISO/TC 69/SC 7
Accuracy (trueness and precision) of measurement methods and results — Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
95.99 ISO/TC 69/SC 6
Experimental designs for evaluation of uncertainty — Use of factorial designs for determining uncertainty functions
60.60 ISO/TC 69/SC 6
Random sampling and randomization procedures
90.93 ISO/TC 69/SC 5
Statistical analysis for evaluating the precision of binary measurement methods and their results
60.60 ISO/TC 69/SC 6
Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
60.60 ISO/TC 69/SC 6
Determination and use of straight-line calibration functions
40.20 ISO/TC 69/SC 6
Determination and use of straight-line calibration functions
90.92 ISO/TC 69/SC 6
Sampling procedures for inspection by attributes — Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
90.93 ISO/TC 69/SC 5
Sequential sampling plans for inspection by attributes
90.93 ISO/TC 69/SC 5
Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
90.93 ISO/TC 69/SC 5
Acceptance sampling procedures by attributes — Accept-zero sampling system based on credit principle for controlling outgoing quality
90.93 ISO/TC 69/SC 5
Combined accept-zero sampling systems and process control procedures for product acceptance
90.93 ISO/TC 69/SC 5
Sampling procedures for inspection by attributes — Two-stage sampling plans for auditing and for inspection under prior information
60.60 ISO/TC 69/SC 5
Acceptance sampling procedures by attributes — Specified quality levels in nonconforming items per million
90.93 ISO/TC 69/SC 5
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach
90.93 ISO/TC 69/SC 5
Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
90.93 ISO/TC 69/SC 5
Random variate generation methods
90.93 ISO/TC 69
Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
95.99 ISO/TC 69/SC 5
Selected illustrations of full factorial experiments with four factors
90.93 ISO/TC 69/SC 7
Selected illustrations of full factorial experiments with four factors — Technical Corrigendum 1
60.60 ISO/TC 69/SC 7
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
90.60 ISO/TC 69/SC 5

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.