Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 150/SC 5 Секретариата Этап ICS
Implants for surgery — Metal bone screws — Dimensions — Part 1: Screws with asymmetrical thread, spherical under-surfaces
95.99
Implants for surgery — Metal bone screws — Dimensions — Part 2: Screws with asymmetrical thread, constant fitting (spherical)
95.99
Implants for surgery — Metal bone screws — Dimensions — Part 4: Screws with symmetrical thread, conical under-surfaces
95.99
Implants for surgery — Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread — Dimensions
90.93
Implants for surgery — Metal bone plates — Part 4: Holes and slots corresponding to screws with symmetrical thread and conical under-surfaces
95.99
Implants for surgery — Metal bone plates — Holes corresponding to screws with asymmetrical thread and spherical under-surface
90.93
Implants for surgery — Intramedullary nailing systems — Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section
90.93
Implants for surgery — Intramedullary nailing systems — Part 2: Medullary pins
95.99
Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements
95.99
Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements
95.99
Implants for surgery — Metallic skeletal pins and wires — Part 1: General requirements
90.93
Implants for surgery — Metallic skeletal pins and wires — Part 1: General requirements
30.98
Implants for surgery — Skeletal pins and wires — Part 2: Steinmann skeletal pins — Dimensions
90.60
Implants for surgery — Skeletal pins and wires — Part 3: Kirschner skeletal wires
90.60
Implants for surgery — Metal bone screws — Mechanical requirements and methods of test — Part 1: Screws with asymmetrical thread, variable fitting (spherical), stainless steel
95.99
Implants for surgery — Metal bone screws — Mechanical requirements and methods of test — Part 2: Screws with asymmetrical thread, constant fitting (spherical), stainless steel
95.99
Implants for surgery — Metal bone screws with asymmetrical thread and spherical under-surface — Mechanical requirements and test methods
90.93
Orthopaedic instruments — Drive connections — Part 1: Keys for use with screws with hexagon socket heads
95.99
Orthopaedic instruments — Drive connections — Part 1: Keys for use with screws with hexagon socket heads
90.60
Orthopaedic instruments — Drive connections — Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
90.60
Implants for surgery — Fixation devices for use in the ends of the femur in adults
90.93
Implants for surgery — Staples with parallel legs for orthopaedic use — General requirements
90.93
Implants for surgery — Metal bone screws with conical under-surface of head — Dimensions
90.60
Implants for surgery — Metal bone plates — Holes and slots corresponding to screws with conical under-surface
90.60
Implants for surgery — Determination of bending strength and stiffness of bone plates
90.60
Orthopaedic drilling instruments — Part 1: Drill bits, taps and countersink cutters
95.99
Orthopaedic drilling instruments — Part 1: Drill bits, taps and countersink cutters
90.20
Implants for surgery — Malleable wires for use as sutures and other surgical applications
90.93
Implants for surgery — Mechanical testing of implantable spinal devices — Fatigue test method for spinal implant assemblies using an anterior support
90.93
Non-active surgical implants — Implants for osteosynthesis — Particular requirements
95.99
Non-active surgical implants — Implants for osteosynthesis — Particular requirements
90.93
Implants for surgery — Metal intramedullary nailing systems — Part 1: Intramedullary nails
90.93
Implants for surgery — Metal intramedullary nailing systems — Part 1: Intramedullary nails
30.98
Implants for surgery — Metal intramedullary nailing systems — Part 2: Locking components
90.93
Implants for surgery — Metal intramedullary nailing systems — Part 2: Locking components
30.98
Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
90.93
Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
30.98
Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
95.99
Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
90.93
Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test — Amendment 1
60.60
Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 2: Nucleus replacements
90.93
Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions
90.93
Implants for surgery — Test methods of material for use as a cortical bone model
90.60
Implants for surgery — Pre-clinical mechanical assessment of spinal implants and particular requirements — Part 1: Pedicle screws systems
20.98
Implants for surgery — Pre-clinical mechanical assessment of spinal implants and particular requirements — Part 2: Spinal intervertebral body fusion devices
60.60

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.