Filter :
Standard and/or project Stage TC
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
95.99 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
90.93 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
95.99 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
90.92 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
50.20 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
90.93 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
90.93 ISO/TC 131/SC 4
Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications
95.99 ISO/TC 131/SC 4
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber products — Hoses and hose assemblies — Wire reinforced hydraulic type
95.99 ISO/TC 45
Rubber hoses and hose assemblies — Wire-reinforced hydraulic type — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification — Technical Corrigendum 1
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
60.60 ISO/TC 45/SC 1
Withdrawal of ISO/R 1943-1970
95.99 ISO/TC 131
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Rubber-covered, spiral wire reinforced, hydraulic type
95.99 ISO/TC 45
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification
60.60 ISO/TC 45/SC 1
Plastics hoses and hose assemblies — Thermoplastics, textile-reinforced, hydraulic type
95.99 ISO/TC 45
Plastics hoses and hose assemblies — Thermoplastics, textile-reinforced, hydraulic type — Specification
95.99 ISO/TC 45/SC 1
Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
95.99 ISO/TC 45/SC 1
Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
95.99 ISO/TC 45/SC 1
Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
95.99 ISO/TC 45/SC 1
Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
60.60 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber products — Hoses and hose assemblies, textile reinforced, for hydraulic purposes
95.99 ISO/TC 45
Rubber hoses and hose assemblies — Textile-reinforced hydraulic type — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification
60.60 ISO/TC 45/SC 1
Fluid power systems and components — Connectors and associated components — Outside diameters of tubes and inside diameters of hoses
95.99 ISO/TC 131/SC 4
Fluid power systems and components — Connectors and associated components — Nominal outside diameters of tubes and nominal inside diameters of hoses
95.99 ISO/TC 131/SC 4
Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
90.60 ISO/TC 131/SC 4
Fluid power systems and components — Connectors and associated components — Nominal pressures
95.99 ISO/TC 131/SC 4
Fluid power systems and components — Connectors and associated components — Nominal pressures
95.99 ISO/TC 131/SC 4
Fluid power systems and components — Connectors and associated components — Nominal pressures
60.60 ISO/TC 131/SC 4
Connections for fluid power and general use — Ports and stud ends with ISO 261 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
60.60 ISO/TC 131/SC 4
Connections for fluid power and general use — Ports and stud ends with ISO 261 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends — Dimensions, design, test methods and requirements
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
90.93 ISO/TC 131/SC 4
Connections for fluid power and general use — Ports and stud ends with ISO 261 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends — Dimensions, design, test methods and requirements
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
90.93 ISO/TC 131/SC 4
Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
95.99 ISO/TC 131/SC 4
Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
90.20 ISO/TC 131/SC 4
Fluid power systems and components — Metric ports — Dimensions and design
95.99 ISO/TC 131/SC 4
Pneumatic fluid power — Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) — Plug connecting dimensions, specifications, application guidelines and testing
95.99 ISO/TC 131/SC 4
Pneumatic fluid power — Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa, and 2,5 MPa (10 bar, 16 bar and 25 bar) — Plug connecting dimensions, specifications, application guidelines and testing
60.60 ISO/TC 131/SC 4
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 — Technical Corrigendum 1
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
90.93 ISO/TC 131/SC 4
Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
60.60 ISO/TC 131/SC 4
Hydraulic fluid power — Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) — Type I metric series and type II inch series
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
60.60 ISO/TC 131/SC 4
Hydraulic fluid power — Hose assemblies — Method of test
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Hoses and hose assemblies — Test methods
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Test methods for hoses and hose assemblies
90.60 ISO/TC 131/SC 4
Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Quick-action couplings — Part 2: Test methods
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Quick-action couplings — Part 2: Test methods
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Dimensions and requirements of quick-action couplings
90.92 ISO/TC 131/SC 4
Hydraulic fluid power — Dimensions and requirements of quick-action couplings
40.00 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 1: 24 degree compression fittings
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 1: 24° cone connectors
60.60 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared fittings
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
90.93 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal fittings
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
90.92 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
30.20 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 4: 24 degree cone connectors with O-ring weld-on nipples
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 5: Test methods for threaded hydraulic fluid power connections
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
90.92 ISO/TC 131/SC 4
Hydraulic fluid power — Connection for tubes and hoses — Dimensions and designs for 37 degrees flare and 24 degrees flareless fittings
95.99 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
90.93 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
90.93 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
90.93 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
95.99 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
90.60 ISO/TC 131/SC 4
Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
95.99 ISO/TC 131/SC 4
Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
60.60 ISO/TC 131/SC 4
Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification — Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification — Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
90.60 ISO/TC 45/SC 1
Rubber and rubber products — Hydraulic hose assemblies — External leakage classification for hydraulic systems
90.93 ISO/TC 45/SC 1
Connectors for fluid power and general use — Designation and nomenclature
90.93 ISO/TC 131/SC 4
Connectors for fluid power and general use — Assembly instructions for connectors with adjustable stud ends and O-ring sealing
90.92 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing
90.93 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends
90.93 ISO/TC 131/SC 4
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends
90.93 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
90.92 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends — Amendment 1
60.60 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
30.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
90.92 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
60.00 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162 flange ends
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
95.99 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
60.60 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 4: Hose fittings with ISO 6149 metric stud ends
90.93 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
90.93 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use — Hose fittings — Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
90.93 ISO/TC 131/SC 4
Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
90.93 ISO/TC 131/SC 4
Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
90.93 ISO/TC 131/SC 4
Pneumatic fluid power — Push-in connectors for thermoplastic tubes
95.99 ISO/TC 131/SC 4
Pneumatic fluid power — Push-in connectors for thermoplastic tubes
60.60 ISO/TC 131/SC 4
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 1: Coupling not for connection under pressure
90.93 ISO/TC 131/SC 4
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Coupling with M16 x 2 end for connection under pressure
95.99 ISO/TC 131/SC 4
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Coupling with M16 x 2 end for connection under pressure
90.93 ISO/TC 131/SC 4
Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications
90.92 ISO/TC 131/SC 4
Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications — Amendment 1
60.60 ISO/TC 131/SC 4
Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 10 MPa (100 bar) to 31,5 MPa (315 bar) — Specifications
40.60 ISO/TC 131/SC 4
Pneumatic fluid power — Connections — Ports and stud ends
95.99 ISO/TC 131/SC 4
Pneumatic fluid power — Connections — Ports and stud ends — Amendment 1
95.99 ISO/TC 131/SC 4
Pneumatic fluid power — Connections — Ports and stud ends
60.60 ISO/TC 131/SC 4
Hydraulic fluid power — Hose and hose assemblies — Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
90.93 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections — Technical Corrigendum 1
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
95.99 ISO/TC 131/SC 4
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
60.60 ISO/TC 131/SC 4
Thermoplastics hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification
95.99 ISO/TC 45/SC 1
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification
90.60 ISO/TC 45/SC 1
Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing
95.99 ISO/TC 131/SC 6
Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing
60.60 ISO/TC 131/SC 6

No matching records found. Please try changing the filter settings.