Filter :
Standard and/or project | Stage | TC |
---|---|---|
Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 1: Inch series shown in metric units
|
95.99 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 1: Inch series shown in metric units
|
90.60 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: 2 and 4-hole flanges and shaft ends — Metric series
|
95.99 | ISO/TC 131 |
Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: Two- and four-hole flanges and shaft ends — Metric series
|
95.99 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series
|
90.60 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series — Technical Corrigendum 1
|
60.60 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal flanges (including circular flanges)
|
95.99 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal flanges (including circular flanges)
|
95.99 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Pumps and motors — Geometric displacements
|
90.93 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter symbols
|
90.93 | ISO/TC 131/SC 2 |
Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and at constant pressure
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and at constant pressure
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure
|
90.93 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability
|
90.93 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of characteristics of motors — Part 3: At constant flow and at constant torque
|
90.93 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Positive displacement pumps, motors and integral transmissions — Determination of steady-state performance
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance
|
90.20 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for the determination of airborne noise levels — Part 1: Pumps
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for the determination of airborne noise levels — Part 2: Motors
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for determination of airborne noise levels — Part 3: Pumps — Method using a parallelepiped microphone array
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 1: Two-step Toet method
|
40.20 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of derived displacement of positive displacement pumps and motors — Part 2: Zero-pressure intercept method
|
40.20 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Fixed displacement pumps — Flow degradation due to classified AC Fine Test Dust contaminant — Test method
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Precision method for pumps
|
95.99 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
|
90.93 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 2: Simplified method for pumps
|
90.93 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors
|
90.92 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors
|
40.20 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps
|
90.60 | ISO/TC 131/SC 8 |
Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics
|
90.93 | ISO/TC 131/SC 8 |
Water hydraulics — Water-hydraulic pumps — Methods of testing and representing basic steady-state performance
|
60.60 | ISO/TC 131/SC 8 |
No matching records found. Please try changing the filter settings.