ISO 11119-3:2013
w
ISO 11119-3:2013
50523

État actuel : Annulée

Cette norme a été révisée par ISO 11119-3:2020

Résumé

ISO 11119-3:2013 specifies requirements for composite gas cylinders up to 150 l water capacity and composite tubes above 150 l water capacity and up to 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.

The cylinders and tubes in ISO 11119-3:2013 are

  • Type 4 Fully Wrapped Cylinders or Tubes with a non-load sharing liner and composite reinforcement on both the cylindrical portion and the dome ends, and
  • Type 5 Fully Wrapped Cylinders or Tubes without liners (including cylinders without liners manufactured from two parts joined together) and with a test pressure of less than 60 bar.

The cylinders are constructed

  • in the form of a disposable mandrel overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a resin matrix to provide longitudinal and circumferential reinforcement, and
  • in the form of two filament wound shells joined together.

Cylinders and tubes manufactured and tested to ISO 11119-3:2013 are not intended to contain toxic, oxidizing or corrosive gases.

ISO 11119-3:2013 is limited to cylinders and tubes with composite reinforcement of carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix.

Cylinders and tubes manufactured and tested to ISO 11119-3:2013 have a minimum design life of 15 years.

ISO 11119-3:2013 does not address the design, fitting and performance of removable protective sleeves.

Informations générales

  •  : Annulée
     : 2013-04
    : Annulation de la Norme internationale [95.99]
  •  : 2
  • ISO/TC 58/SC 3
    23.020.35 
  • RSS mises à jour

Cycle de vie

Vous avez une question?

Consulter notre FAQ

Service à la clientèle
+41 22 749 08 88

Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)