Reference number
ISO/IEC 14846:2003
© ISO 2024
International Standard
ISO/IEC 14846:2003
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Call Intrusion supplementary service
Edition 2
2003-04
Preview
Indisponible en français
Publiée (Edition 2, 2003)
Cette publication a été révisée et confirmée pour la dernière fois en 2008. Cette édition reste donc d’actualité.

ISO/IEC 14846:2003

Langue
Format
CHF 0
Frais d'expédition non compris
La version électronique de cette Norme internationale peut être téléchargée à partir du site Web du Groupe de travail ISO/CEI sur les technologies de l'information (ITTF)

Résumé

ISO/IEC 14846:2003 specifies the signalling protocol for the support of the Call Intrusion supplementary service (SS-CI) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).

SS-CI is a supplementary service which, on request from the calling user, enables the calling user to establish communication with a busy called user by breaking into an established call between the called user and a third user (unwanted user).

The Q reference point is defined in ISO/IEC 11579-1.

Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 14845.

The signalling protocol for SS-CI operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.

ISO/IEC 14846:2003 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-CI and other supplementary services and ANFs.

NOTE Additional interactions that have no impact on the signalling protocol at the Q reference point can be found in the relevant stage 1 specifications.

ISO/IEC 14846:2003 is applicable to PINXs which can interconnect to form a PISN.

Informations générales

  • État actuel
     : Publiée
    Date de publication
     : 2003-04
    Stade
    : Clôture de l'examen [90.60]
  • Edition
     : 2
  • Comité technique :
    ISO/IEC JTC 1/SC 6
    ICS :
    33.040.35 
  • RSS mises à jour

Cycle de vie

Objectifs de développement durable

Cette norme contribue à l'Objectif de développement durable suivant

9
Industrie, innovation et infrastructure

Vous avez une question?

Consulter notre Aide et assistance

  2. Store
  3. Catalogue de normes
  4. ICS
  5. 33
  6. 33.040
  7. 33.040.35
  8. ISO/IEC 14846:2003