Filtrar :
Norma o proyecto bajo la responsabilidad directa de ISO/TC 29/SC 9 Secretaría Etapa ICS
Parallel shank jobber and stub series drills and Morse taper shank drills
95.99
Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1
95.99
Parallel shank jobber and stub series drills and Morse taper shank drills
90.93
Hand reamers
90.93
Reamers — Part 2: Long fluted machine reamers with Morse taper shanks
90.60
Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
90.60
Reduction sleeves and extension sockets for tools with Morse taper shanks
90.93
Drill chuck tapers
90.93
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
95.99
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
90.93
Shanks for turning and planing tools — Types and dimensions of the section
95.99
Shanks for turning and planing tools — Shapes and dimensions of the section
90.60
Carbide tips for brazing on turning tools
95.99
Carbide tips for brazing on turning tools
90.93
Turning tools with carbide tips — External tools
95.99
Turning tools with carbide tips — External tools
90.93
Machine tools — Self-holding tapers for tool shanks
90.60
7/24 tapers for tool shanks for manual changing
90.60
Parallel shank twist drills — Long series
95.99
Cylindrical shank twist drills — Long series
95.99
Cylindrical shank twist drills — Long series
90.93
Turning tools with carbide tips — Designation and marking
90.20
Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application
95.99
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application
95.99
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1
95.99
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
95.99
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
90.60
Turning tools with carbide tips — Internal tools
95.99
Turning tools with carbide tips — Internal tools
90.93
Machine chucking reamers with parallel shanks or Morse taper shanks
95.99
Machine chucking reamers with cylindrical shanks and Morse taper shanks
90.93
Special tolerances for reamers
90.60
Short machine taps and hand taps
95.99
Short machine taps and hand taps
90.93
Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation
90.93
Milling machine arbors with 7/24 tapers — Part 2: Accessories
90.60
Centre drills for centre holes without protecting chamfers — Type A
95.99
Centre drills for centre holes without protecting chamfers — Type A
90.93
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
95.99
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
90.60
Machine tools — Morse taper shanks — Cotter slots with taper keys
90.60
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
95.99
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
90.93
End mills and slot drills — Part 2: Milling cutters with Morse taper shanks
95.99
End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks
90.93
End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks
95.99
End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
90.93
Indexable inserts for cutting tools — Designation
95.99
Indexable inserts for cutting tools — Designation
95.99
Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts
95.99
Indexable inserts for cutting tools — Designation
95.99
Indexable inserts for cutting tools — Designation — Technical Corrigendum 1
95.99
Indexable inserts for cutting tools — Designation
95.99
Indexable inserts for cutting tools — Designation
90.93
Machine bridge reamers
95.99
Machine bridge reamers
95.99
Machine bridge reamers
90.60
Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks
95.99
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
95.99
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
90.93
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps
90.93
Hand taps for parallel and taper pipe threads — General dimensions and marking
95.99
Hand taps for parallel and taper pipe threads — General dimensions and marking
90.93
Metal slitting saws with fine and coarse teeth — Metric series
95.99
Metal slitting saws with fine and coarse teeth — Metric series
95.99
Metal slitting saws with fine and coarse teeth — Metric series
90.60
Drills for use prior to tapping screw threads
90.93
Hacksaw blades — Part 2: Dimensions for machine blades
90.93
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
90.93
Centre drills for centre holes with protecting chamfer — Type B
95.99
Centre drills for centre holes with protecting chamfer — Type B
90.93
Centre drills for centre holes with radius form — Type R
95.99
Centre drills for centre holes with radius form — Type R
90.93
Hand- and machine-operated circular screwing dies and hand-operated die stocks
90.93
Cylindrical cutters with plain bore and key drive — Metric series
95.99
Cylindrical cutters with plain bore and key drive — Metric series
90.93
Slotting cutters with plain bore and key drive — Metric series
90.93
Shell end mills with plain bore and tenon drive — Metric series
90.93
Side and face milling cutters with plain bore and key drive — Metric series
90.93
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
95.99
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
90.60
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
90.93
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
60.60
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Technical Corrigendum 1
60.60
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
60.60
Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm
90.60
Circular saw blades for woodworking — Dimensions
95.20
Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors
90.93
Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters
90.93
Single point cutting tools — Corner radii
95.99
Single point cutting tools — Corner radii
90.93
Extra-long Morse taper shank twist drills
95.99
Extra-long Morse taper shank twist drills
90.93
Extra-long parallel shank twist drills
95.99
Extra-long parallel shank twist drills
90.93
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
95.99
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
90.93
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
95.99
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
90.93
Narrow bandsaw blades for woodworking — Dimensions
95.20
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
90.93
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
90.93
Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks
90.93
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
90.60
Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks
90.93
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
95.99
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
90.93
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
95.99
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
90.60
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
95.99
Subland twist drills for holes prior to tapping screw threads
90.60
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads
95.99
Hand taper pin reamers
90.93
Machine taper pin reamers with parallel shanks
95.99
Machine taper pin reamers with parallel shanks
90.93
Machine taper pin reamers with Morse taper shanks
95.99
Machine taper pin reamers with Morse taper shanks
90.93
Tool-life testing with single-point turning tools
90.60
Milling cutters — Nomenclature
90.60
Milling cutters — Nomenclature — Technical Corrigendum 1
60.60
Inverse dovetail cutters and dovetail cutters with cylindrical shanks
90.93
Bore cutters with key drive — Form milling cutters with constant profile
95.99
Bore cutters with key drive — Form milling cutters with constant profile
90.93
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
90.93
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
90.60
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
90.60
Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface
90.60
Tapered die-sinking cutters with parallel shanks
90.20
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
90.93
Parallel shank tools — Driving tenons and sockets — Dimensions
95.99
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots
95.99
Countersinks, 90°, with Morse taper shanks and detachable pilots
90.93
Countersinks, 90 degrees, with parallel shanks and solid pilots
95.99
Countersinks, 90°, with parallel shanks and solid pilots
90.93
Counterbores with parallel shanks and solid pilots
95.99
Counterbores with parallel shanks and solid pilots
90.93
Counterbores with Morse taper shanks and detachable pilots
95.99
Counterbores with Morse taper shanks and detachable pilots
90.93
Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions
95.99
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
95.99
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
90.93
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
95.99
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
90.93
Jig bushes — Definitions and nomenclature
95.20
Metal cutting band saw blades — Part 1: Definitions and terminology
95.99
Metal-cutting band saw blades — Part 1: Vocabulary
90.93
Metal cutting band saw blades — Part 2: Basic dimensions and tolerances
95.99
Metal-cutting band saw blades — Part 2: Characteristics and dimensions
90.93
Hardmetal heading dies — Terminology
95.20
As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances
95.20
Machine tools — Positive drive of Morse tapers
90.93
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks
90.60
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
90.60
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
90.93
Twist drills — Terms, definitions and types
90.60
Twist drills — Terms, definitions and types — Technical Corrigendum 1
60.60
Reamers — Terms, definitions and types
90.93
Ground high speed steel tool bits
95.20
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
95.99
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
90.93
Turning and copying tool holders and cartridges for indexable inserts — Designation
95.99
Turning and copying tool holders and cartridges for indexable inserts — Designation
95.99
Turning and copying tool holders and cartridges for indexable inserts — Designation
90.93
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimensions and calculation for corrections
90.60
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F
90.60
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K
90.60
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L
90.60
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U
90.60
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q
90.60
Boring bars for indexable inserts — Dimensions
95.99
Boring bars for indexable inserts — Dimensions
95.99
Boring bars for indexable inserts — Dimensions — Amendment 1
95.99
Boring bars for indexable inserts — Dimensions
95.99
Boring bars for indexable inserts — Dimensions
95.99
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
95.99
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
90.93
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
95.99
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
90.93
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
95.99
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
90.93
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
95.99
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
90.93
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
95.99
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
90.93
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
95.99
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
90.93
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
95.99
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
90.93
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
95.99
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
90.93
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
95.99
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
90.93
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
95.99
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
90.93
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
95.99
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
90.93
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
95.99
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
90.93
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
95.99
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
90.93
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
95.99
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
90.93
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
95.99
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
90.93
Single point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
Single-point tool holders for turning and copying, for indexable inserts — Dimensions — Amendment 1
95.99
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
95.99
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions
90.60
Cartridges, type A, for indexable inserts — Part 2: Style F
90.60
Cartridges, type A, for indexable inserts — Part 3: Style G
90.60
Cartridges, type A, for indexable inserts — Part 4: Style J
90.60
Cartridges, type A, for indexable inserts — Part 5: Style K
90.60
Cartridges, type A, for indexable inserts — Part 6: Style L
90.60
Cartridges, type A, for indexable inserts — Part 7: Style R
90.60
Cartridges, type A, for indexable inserts — Part 8: Style S
90.60
Cartridges, type A, for indexable inserts — Part 9: Style T
90.60
Cartridges, type A, for indexable inserts — Part 10: Style U
90.60
Cartridges, type A, for indexable inserts — Part 11: Style W
90.60
Cartridges, type A, for indexable inserts — Part 12: Style Y
90.60
Cartridges, type A, for indexable inserts — Dimensions — Addendum 1
95.99
Cartridges, type A, for indexable inserts — Dimensions
95.99
Cartridges, type A, for indexable inserts — Dimensions
95.99
Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A
60.60
Polygonal turret interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A
60.60
Polygonal turret interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A
60.60
Taps and thread cutting — Nomenclature of the main types and terminology
90.93
Circular screwing dies — Terminology
90.93
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion
90.93
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion — Technical Corrigendum 1
60.60
Double equal angle cutters with plain bore and key drive
95.99
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation
95.99
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation
95.99
Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation
95.99
End mills with indexable inserts — Part 1: End mills with flatted parallel shank
95.99
End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank
90.93
End mills with indexable inserts — Part 2: End mills with Morse taper shank
95.99
End mills with indexable inserts — Part 2: End mills with Morse taper shank
90.93
Face milling cutters with indexable inserts — Dimensions
95.99
Face and shoulder milling cutters with indexable inserts — Dimensions
90.93
Side and face milling (slotting) cutters with indexable inserts — Dimensions
95.99
Side and face milling (slotting) cutters with indexable inserts — Dimensions
90.60
Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance
95.99
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance
95.99
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts
95.99
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
95.99
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
90.60
Core drills with parallel shanks and with Morse taper shanks
95.99
Core drills with parallel shanks and with Morse taper shanks
90.93
Hexagonal dienuts
90.93
Saw teeth for woodworking saws — Profile shape — Terminology and designation
90.60
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions
95.99
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
90.93
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics
95.99
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF
90.93
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
95.99
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
90.60
Bore type milling cutters for indexable inserts — Designation
95.99
Hardmetal burrs — Part 1: General specifications
95.99
Hardmetal burrs — Part 1: General specifications
90.60
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
95.99
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
90.60
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
95.99
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
90.60
Hardmetal burrs — Part 4: Spherical burrs (style D)
95.99
Hardmetal burrs — Part 4: Spherical burrs (style D)
90.60
Hardmetal burrs — Part 5: Oval burrs (style E)
95.99
Hardmetal burrs — Part 5: Oval burrs (style E)
90.60
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
95.99
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
90.60
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
95.99
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
90.60
Hardmetal burrs — Part 8: Flame burrs (style H)
95.99
Hardmetal burrs — Part 8: Flame burrs (style H)
90.60
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
95.99
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
90.60
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
95.99
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
90.60
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
95.99
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
90.60
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
95.99
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
90.60
Shank type milling cutters for indexable inserts — Designation
95.99
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
95.99
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
90.93
Tool life testing in milling — Part 1: Face milling
90.93
Tool life testing in milling — Part 2: End milling
90.93
High-speed steel machine taps with ground threads — Technical specifications
90.60
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
90.93
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF
90.93
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
95.99
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
90.93
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
95.99
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
90.93
Machine tools — Front faces of spindle holders for machining centres — Functional dimensions
90.60
Drills with indexable inserts — Cylindrical shanks with a parallel flat
95.99
Drills with indexable inserts — Cylindrical shanks with a parallel flat
90.60
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
95.99
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
90.93
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
95.99
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
90.93
Dimensions of accessories for cutter arbors with parallel key and tenon drive
90.93
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
90.60
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
90.60
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
90.60
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
90.60
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
90.60
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
90.60
Key type three-jaw drill chucks — Specification
90.60
Keyless type three-jaw drill chucks — Specification
90.60
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
90.93
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
90.93
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
90.93
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
90.93
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
90.93
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
90.93
Tool holders with cylindrical shank — Part 7: Type F with taper seat
90.93
Tool holders with cylindrical shank — Part 8: Type Z, accessories
90.93
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
90.93
Spot drills
95.99
Spot drills
90.93
High-speed steel two-flute twist drills — Technical specifications
90.60
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
90.93
Solid hardmetal end mills with parallel shank — Dimensions
95.99
Solid hardmetal end mills with cylindrical shank — Dimensions
95.99
Solid hardmetal end mills with cylindrical shank — Dimensions
90.60
Cutting tools — Designation of high-speed steel groups
95.99
Cutting tools — Designation of high-speed steel groups
90.93
Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation
95.99
Milling cutters — Designation — Part 1: Shank type end mills of solid or tipped design
95.99
Milling cutters — Designation — Part 1: Shank-type end mills of solid or tipped design
95.99
Milling cutters — Designation — Part 2: Shank type and bore type milling cutters with indexable inserts
95.99
Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts
95.99
Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
90.93
Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
95.99
Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
60.60
Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
95.99
Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB
60.60
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
95.99
Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U
60.60
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
95.99
Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U
60.60
Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
60.60
Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES
60.60
Woodruff keaseat cutters — Dimensions
95.99
Woodruff keyseat cutters — Dimensions
90.93
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
90.93
Milling cutters for high speed machining — Safety requirements
90.60
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials — Dimensions
95.99
Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
90.93
Cubic boron nitride inserts, tipped or solid — Dimensions, types
95.99
Cubic boron nitride inserts, tipped or solid — Dimensions, types
90.20
Polycristalline diamond inserts, tipped — Dimensions, types
95.99
Polycristalline diamond inserts, tipped — Dimensions, types
90.20
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions
90.93
CVD diamond tools — Categorization
90.60
Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series
60.60
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
60.60
Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers
90.60
Modular taper interface with ball track system — Part 3: Dimensions of shanks, four locking elements
40.00
Modular taper interface with ball track system — Part 4: Dimensions of receivers, four locking elements
40.00
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
95.99
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
60.60
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
90.93

No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.