Filter :
Standard and/or project under the direct responsibility of ISO/TC 61/SC 6 Secretariat | Stage | ICS |
---|---|---|
Plastics — Determination of water absorption
|
95.99 | |
Plastics — Determination of water absorption
|
95.99 | |
Plastics — Determination of water absorption
|
90.93 | |
Plastics — Determination of the effects of liquid chemicals, including water
|
95.99 | |
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
|
95.99 | |
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
|
90.93 | |
Plastics — Determination of loss of plasticizers — Activated carbon method
|
95.99 | |
Plastics — Determination of loss of plasticizers — Activated carbon method
|
90.93 | |
Plastics — Determination of migration of plasticizers
|
95.99 | |
Plastics — Determination of migration of plasticizers
|
90.93 | |
Plastics — Standard atmospheres for conditioning and testing
|
95.99 | |
Plastics — Standard atmospheres for conditioning and testing
|
95.99 | |
Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1
|
95.99 | |
Plastics — Standard atmospheres for conditioning and testing
|
95.99 | |
Plastics — Standard atmospheres for conditioning and testing
|
90.93 | |
Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value
|
95.99 | |
Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
|
90.93 | |
Plastics — Determination of behaviour under the action of fungi and bacteria — Evaluation by visual examination or measurement of change in mass or physical properties
|
95.99 | |
Plastics — Evaluation of the action of microorganisms
|
95.99 | |
Plastics — Evaluation of the action of microorganisms
|
90.93 | |
Plastics — Evaluation of the action of microorganisms
|
30.98 |
|
Plastics — Methods of exposure to solar radiation — Part 1: General guidance
|
90.92 | |
Plastics — Methods of exposure to solar radiation — Part 1: General guidance
|
40.60 | |
Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass
|
90.92 | |
Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass
|
40.60 | |
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation
|
95.99 | |
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation
|
90.92 | |
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation
|
30.60 |
|
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
|
95.99 | |
Plastics — Determination of time-temperature limits after prolonged exposure to heat
|
90.93 | |
Plastics — Polypropylene granules — Determination of thermal stability in air by pH method
|
95.99 | |
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
|
95.99 | |
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
|
95.99 | |
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
|
95.99 | |
Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
|
90.92 | |
Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
|
40.60 | |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Bent strip method
|
95.99 | |
Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
|
95.99 | |
Plastics — Methods of exposure to natural weathering
|
95.99 | |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
95.99 | |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
95.99 | |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
95.99 | |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
90.93 | |
Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material
|
60.60 | |
Plastics — Method of exposure to electrodeless plasma radiation sources
|
60.60 | |
Measurement method of anti-biofilm activity on plastic and other non-porous surfaces
|
60.60 | |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance and requirements
|
60.60 | |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
90.93 | |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters
|
60.60 | |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
60.60 | |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps — Technical Corrigendum 1
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
90.92 | |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
50.20 | |
Plastics — Test method of exposure to white LED lamps
|
60.60 | |
Plastics — Determination of environmental stress cracking (ESC) — Constant-tensile-stress method
|
95.99 | |
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
|
95.99 | |
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
|
95.99 | |
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
|
90.93 | |
Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
|
90.93 | |
Plastics — Methods for marine exposure
|
95.99 | |
Plastics — Methods for marine exposure
|
90.93 | |
Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
|
95.99 | |
Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
|
90.93 | |
Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1
|
60.60 | |
Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
|
95.99 | |
Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
|
90.60 | |
Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
|
90.93 | |
Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
|
95.99 | |
Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
|
90.92 | |
Plastics — Use of polyethylene reference film (PERF) for monitoring laboratory and outdoor weathering conditions
|
20.60 |
|
Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
|
60.60 | |
Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation
|
90.93 | |
Plastics — Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation
|
90.93 | |
Measurement of antiviral activity on plastics and other non-porous surfaces
|
90.93 | |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 1: General guidance
|
90.93 | |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method
|
90.93 | |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method
|
90.93 | |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 4: Ball or pin impression method
|
90.93 | |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method
|
90.93 | |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 6: Slow strain rate method
|
90.93 | |
Plastics — Measurement of antibacterial activity on plastics surfaces
|
95.99 | |
Measurement of antibacterial activity on plastics and other non-porous surfaces
|
90.93 | |
Plastics — Determination of apparent activation energies of property changes in standard weathering test methods
|
60.60 | |
Plastics — Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus
|
60.60 | |
Plastics - Method of exposure to combined UV radiation and creep load
|
20.60 |
|
Plastics — Artificial weathering including acidic deposition
|
90.93 |
No matching records found. Please try changing the filter settings.